Summary: I am working on a computer (Acer) for friend. There were no hard drive installed, I have a used but still good 540 MB, i am installing these until the...
Summary: no you can't change languages everytime you boot. there is a .dll which controlls the languages but i dont recomend you screw with changing that. i ...
Summary: Cirrus Logic 5430/40 - I need help downloading an amiobios driver. PLEASE HELP ME!!! I wait for you to my mailbox...... Thank you very much...
Summary: Did you borrow the hard drive from an XP system? Fdisk usually will not recognize a NTFS drive. Are you using Dell software to recover? It also probab...
Summary: Hi there, I'm trying to reinstall Windows 98 after buying a new hard drive for an ancient system, with an Asus P2B-VM board, unfortunately the origin...
Summary: my IDE hard drive is setup as single and connected to the motherboard thru a slot, my cd-rom drive is set up as a slave and is also connected to the m...
Summary: I just built a PIII 733MHZ System and installed a hard drive from a PII system. I am trying to avoid reformatting the drive, however I seem to be gett...
Summary: Hi there, I am encountering problems with installing windows 95 on my system. The problem isn't in the software, it's the hardware. The hard drive par...
Summary: Hi Guys... Currently I have an Asus A7V133 motherboard, but in a few days I will be getting the Asus A7N8X motherboard. I already have 3 hard drives i...
Summary: kamel, What do mean you don't have "op"? Are you running W9x? Do you have a working drive with an operating system (OS)? Assuming you do and you ju...
Summary: I made a big mistake while trying to partition my 80Gb hard drive for linux with Win 98SE already installed and running. Apparently I indavertantly de...
Summary: You should get more ram. Windows 98SE only starts to run as it should if you have at least 128 mb. With the amount you have, your hard drive is not ru...
Summary: I had windows 2000 on a hard drive, the computer was too slow for it so I wanted to put windows 98 on it, I didn’t format the drive because I wanted t...
Summary: i have windows 98 installed and i bought an external hard drive for this computer a while back. but now i have lost the driver disc for the external d...
Summary: ok, this may not even be possible, but I figured I'd ask to check, because I don't want to do what I think I have to do. The other day I was usi...
Summary: I just replaced my hard drive...formated and tried to install WIN95..when I first did this it gave me an error that said i had a registry/configuratio...
Summary: Please help have to reformatt my hard drive with win98 could you send me step by step how to on this...i really need to refomatt my computer...my MsPa...
Summary: I have a win98 machine, with 192mb RAM, and 700mghz PIII, it is a dell laptop. One of the best uses it serves other than school work is as an MP3 j...
Summary: Once I was installing a hard drive for a family member... the hard drive was also a seagate, but it was older though -- maybe 200mb, not sure, any way...
Summary: I need some serious help here please! I've just purchased an addition hard drive at an on-line auction which I wish to piggy back my existing hard dri...
Summary: This a rather long question, and I appreciate and thank in advance all who take the time to help me. I consider this to be a somewhat Hard "project" t...
Summary: I currtently am running Win 98, and I would like to know how I can reformatt my hard drive, and install Win 95 instead. I need step by step instructi...
Summary: If you did a FAT 32 installation and are booting with FAT 16 boot disk. You will not be able to see the Fat 32 partition. If what is need is a FAT 3...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
