Summary: Tight RAM timings offer very little to performance, & if you set em too tight, they can cause your system to become unstable http://www6.tomshardware....
Summary: You can see the differences are very small...say about a 6% difference from best to worst of each category. If you factor in variations in test resul...
Summary: What type of Ram timings r u guys pulling off with the Kingston HyperX 512 dual Channel Ram with a AMD Athlon Barton 2500+ OC to 2.2/ Mobo Abit NForce...
Summary: If it works, its okay, see here; http://www.corsairmicro.com/memory_basics/153707/index.html it explains all you need to know about ram timings. The A...
Summary: hi guys could any of you give me some good ram timings for corsair xms 3500 platinum i have two sticks of 256 in dual channel mode currently at 7-3-3-...
Summary: IF I increase my FSB, i have to increase my ram timing too. So how would I know if it's better to lower the timing or to increase the FSB? Lets say, I...
Summary: I answered this yesterday but it appears your post was deleted. "the only bios changes i have made for the ram is to set it to dual channel mode and f...
Summary: hi i have Corsair XMS pc3200 ram 1gb to single 512mb sticks running in dual channel mode my fsb is at 232mhz giving my cpu 3.7ghz my ram timings are ...
Summary: i know ive got a couple of posts aready but, ive heard allot about people ajusting there ram timings for better performance. This is completly new to ...
Summary: Hey everybody. I have never really understood stuff about ram timings and terms like 'CAS Latency'. I have only just realized that buying el-cheapo st...
Summary: Hi all, I currently have my CPU running @ 200x11. I want to clock it a bit higher, But when i raise the FSB to 205, with ram timings set to "aggressiv...
Summary: After reading a couple of things about how changing some settings wouldn't kill anything, I decided to fiddle around. I was running 512M of Corsair a...
Summary: I have one 512 stick of corsair pc3200 ddr 400 and am running 200mhz fsb on my 2700+ with an 11 multiplier and was wondering if anyone could recommend...
Summary: If you don't even know how to do it, can you explain why you wanna do it & what you hope to accomplish? What are your default RAM timings & what timin...
Summary: You're losing performance by not running your CPU:DRAM at 1:1 ratio. Try relaxing your RAM timings a little, maybe 2.5-3-3-7 or 3-4-4-8. Increasing th...
Summary: How many amps are on the +12v rail of that PSU? 550 watts is worthless if you only have 10-12 amps on the +12v. You should have a minimum of 16 amps.....
Summary: So I have this new nForce 2, and I'm just getting into overclocking, but I first have a multi-part question about ram. If I want to crank up the FSB, ...
Summary: Hi guys, merry christmas to all of you. The truth is i'm more interested in my PC right now than christmas. XD Now to the point... The thing is I've...
Summary: Know your RAM: PC3200 will run at 133, 166, or 200MHz PC2700 will run at 133 or 166MHz, it "might" run at 200MHz PC2100 will run at 133MHz, it "might"...
Summary: The performance you gain from tightening the RAM timing is miniscule...& it often causes stability problems. It doesn't hurt to experiment though. As ...
Summary: I have sort of a multie question about overclocking and how types/speeds of ram can affect the outcome. What is the general importance or ram to overc...
Summary: Have a look at this http://www.corsairmicro.com/memory_basics/153707/index.html It will tell you all about RAM timings, along with a lot of other usef...
Summary: If your CPU isn't overclocked, there's not much point overclocking the RAM. You should run your CPU:DRAM ratio at 1:1 with your RAM timings as tight a...
Summary: Well the reason I was saying that I "hope" it works out because some of the reviews saying it wasn't a good overclock or the RAM timings weren't as go...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
