Computing.Net search found documents about:
problem to install nt4.0
Results 1 - 25 of 21161
![[higher confidence]](/Excite/pictures/AT-red_x.gif)
- higher confidence, ![[lower confidence]](/Excite/pictures/AT-black_x.gif)
- lower confidence
problem to install nt4.0 Summary: after installing nt4.0 i got this message: unable to load device driver. systemroot\system\drivers\ati.sys device driver could not be loaded. error st...
Installing NT4.0 over Win3.1 Summary: When attempting to install NT4.0 over DOS6.1/Win3.1, I get the error message: 'This version of MSCVRT20.DLL is not compatible with WIN32S.', and the s...
How to Fresh install NT4.0 WS Summary: I have a New PC ready for NT4.0 WS install. So far done nothing, even the HD is not yet FDISK and formatted. Please tell me as to how I can install NT...
NT4.0 installation Summary: hello,I tried to install NT4.0 in my 20G hard drive that has three partitions. First c drive is Win98, and I want to install NT in D drive. However, a...
Automatic install NT4.0 AXP Summary: Does anyone know a way to automatically install NT4.0 on ALPHAs ? (Alpha Personal Workstation 600) Thanks Peter...
Problems with NT4.0 and Compaq Presario Summary: We have a PC Compaq Presario 166 Mhz., we are trying to install NT4.0 IN A 10 Gb. Hard disk but when we try to reboot appear on screen a message about...
How to install NT4.0 with 36GB SCSI (U160) hard drive? Summary: Hi, Just purchased a new PIII-800mhz server w/36GB SCSI (Ultra160) hard disk. When I first boot up the NT4.0 CD-ROM and the Adaptec Ultra160 driver, i...
Failing to install NT4 Summary: HELP: Unable to install NT4 now after Bios update. Don't know why. 10.2 GB HDD. Partitioned as 2GB fat16 Primary, and rest as an extended for now. NT ...
NT4.0 AND EIDEmax CARD Summary: I have tried, without success, to install NT4.0 on an IBM PS/1. Originally a 486DX33, the machine now has an AMD 586 P75 upgrade processor, 64Mb RAM,...
NT4.0 setup Summary: I'm trying to install NT4.0 SP4.0 on to P133/6mbram with 2gb primary partioned computer. During setup(after Nt copied necessary files to my HDisk), NT...
installing ntserver4.0 Summary: Hi I had pentimum 3 800 mh,40 gb hard disk.this 40 gb hard disk is partitiond as c,d,e,f. windows 98 is installed on it.i want install windows nt se...
make a NT4.0 Workstation boot disk Summary: WIll someone check this for me please . I want to make an NT4.0 boot floppy disk . I copied the NTLDR file from the NT4.0 CD and to a floppy disk an...
NT 4.0 Workstation Install Problems Summary: Hi: I am trying to install NT4.0, I boot my machine from CD-ROM and follow the text based instructions and select the partition on which I want NT ins...
Un-installing NT4.0 ? Summary: How do you go about un-installing windows NT4.0 ? I want to format the hard drive and load another OS on it and I don't care if anything on the hard...
trouble with dual boot Win98/NT4.0 Summary: hi, My hard drive is 18.2 GB Quantum fireball Plus tm KA , I install a software called diskManagerDiskGo which will help set up the bios to dective ...
Networked Printer (HP2100TN) Problem: Conflicts Between NT4.0 and 98 Summary: I have an HP2100TN that I'm trying to make fully functional on a network for both NT4.0 and Win98 machines. I'm encountering two problems: 1) NT and ...
Installing WINDOWS NT4.0 error Summary: I have a problem installing NT4.0 from the CD ROM I would appreciate if you could help me with this (full installation procedures, please) Thanks ...
how to install modem in NT server 4.0 Summary: I have a PC with Intel 810 motherbroad. The modem works fine with COM3(I believe it is a vertual one since the modem is installed in the motherbroad)....
NT4.0 / ATA66 / DMA enabled - disk writes fail Summary: Problems ======== 1) When DMA is enabled, I get the following errors in event viewer: Application popup: System Process - Lost Delayed-Write Da...
Lock error when trying to install NT 4.0 Server Summary: I was trying to install 4.0 Server on my dual P133 with a 1 Gig SCSI harddrive. The controller card is BT-946C and I have my 4X SCSI CD-ROM at ID 4 a...
Boot NT4.0 w.o. mouse - no mouse driver installed Summary: My remotely-controlled workstation with NT4.0 has normally no keyboard, screen and mouse connected. It is operated remotely over WAN(ISDN). When booti...
Installing NT to dual boot with Win98 Summary: I run Win98, P3 500 with an unpartitioned 17Gig HD. I intend to install NT4.0 and dual boot. Advice/tips/pitfalls would be appreciated, many thanks in...
problems installing NT4.0 on WIN98 dual boot. HELP! Summary: I have installed partition magic on my computer and I am trying to use it to install winnt in a seperate partition from the C drive which is currently...
NT 4 Install Problem Summary: I am trying to install NT4.0 server. But I getting an error message in the middle of the installation saying "cdrom.sys" could not be copied. Pleas he...
Re-installing NT4 fails after W2k installed Summary: did you install service pack 5 or 6 before upgrading to W2K? the problem could be the file system. nt4 uses ntfs4, after service pack 5 or win2k it us...
Jump To:
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | >>
