Summary: I have an olivetti envision P75 and i can't enter in my setup. I must go to my setup because i must configure my hard disk. please help me!!!...
Summary: Dear sir, When i want to activaite my dialpad it gives me the plugin error,but when i click ok buttom the display appears but after dialing my number ...
Summary: I have a Compaq 4770 computer with a W95 operating system. I had Office 4.3 on the computer and was upgrading by replacing with Office Pro 97 off a c...
Summary: just had similar problems running setup. Numerous repeated fdisks and formats. Turned out it was a memory problem, and changing the bios settings for ...
Summary: Hello, While upgrading an old laptop (omnibook 3000) from 95 to 98SE 6% of setup was complete when the power failed in the area. Well the power is ba...
Summary: Ok, I've just formated a drive with Fdisk via Win98 boot disk. I've begun installing windows and everything has gone through successfully up untill th...
Summary: Hi Wm. Different printers need a different amount of border (white space) along the edges in which they can print. Some printers are fine 1/4" from ...
Summary: Cloning a drive is a short term proposition that works.It does but...eventually you should go back to the regular Windows fdisk and partition the driv...
Summary: I have reformated and installed again with my backup copies of DOS 6.22. I have ran memmaker and still have the same problem, Windows setup still says...
Summary: Mark, I tried different RAM per Al's post - slight change, but still problems. Now, it says that I "interrupted the install of CAB file" in the middle...
Summary: try to fix the problem of the diskette with scandisk or norton disk doctor. if this does not work: try a reinstall and choose option Custom. Then clea...
Summary: Hope this helps! OFF2000: Troubleshooting Office Kernel32.dll Errors Under Windows 98 SUMMARY This article contains information about troubleshoot...
Summary: You may need to try another bootdisk. If you start the installation with setup/nm instead of setup it will bypass the hardware requirement test. But ...
Summary: I had that problem with a 4x burner. I compared these disks with some I'd recorded when the burner was new and noticed the burned parts of the earlie...
Summary: Thanks for the response. I replaced the original 64 meg of RAM with the new RAM and the PC shut down all right (it also shut down all right when the o...
Summary: what I would suggest that you do is run FDISK on the laptop and create a small extended dos partition for the install files.100megs should be large en...
Summary: Hello all, i have an extremely weird problem. Here goes - I have a Win2000 network with ms exchange, and on one of our laptops (win98) an annoying pro...
Summary: I'm too facing the same problem while installing win98. Win95 is working fine but whenever I try to install win98 it gives something various errors wh...
Summary: Pc is pentium 133 on boot up following message appeared "FDC Failure Pri Master HDD Error Run setup Press f1 to resume" I hit reset and it just went a...
Summary: This isn't the first time I've posted a message on here, but the goalposts seem to have been moved since the last time. In a nutshell, I'm trying to i...
Summary: First, let me say this was not my original problem. Originally, I was missing 3 .vxd files: vredir.vxd, dfs. vxd, and vnetsup.vxd. Somebody saw my pl...
Summary: I initially had Jason's problem - Audio CDs locked up the machine. After going to Control Panel->Multimedia->Devices->Media Control Devices and then d...
Summary: This is a classic errors of win95 installation routine, and has been mentioned in win95 books. The problem was that the connections to CD had been ter...
Summary: As far as your problem of not being able to go into DOS mode from the shutdown menu, I can only suggest that you run Windows setup from the start menu...
Summary: This error can occur as a result of Setup running into a conflict with your current Memory manager. Remove all references to a Memory Manager in CONF...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
