Summary: What about a ram upgrade on an old powerbook 1400? Would that help the performance?. This lady has one she got for $20 and it only has 16mgs of ram....
Summary: can anyone help? I have a 2004 g4 powerbook w/ 512mb ram. I'd like to upgrade it to full-spec 2gb of ram, my question is, can I use (best-spec) DDR2...
Summary: Question, I just upgraded the ram in my powerbook g4. Now it sometimes boots up, sometimes doesn't. Sometimes it works ok, but iphoto and imovie won't...
Summary: I currently own a Powerbook G3 Series Wallstreet and would like to upgrade the amount of ram. Is there special ram for apple computers, or can i just...
Summary: I just bought the new G4 (FW800) with 256 mb of PC2100 DDR ram. Apple says I *cannot* upgrade ram with PC2700 DDR (333), only PC2100 DDR (266). Oth...
Summary: Did you use Sonnet Processor Version: 2.3.1 software? From sonnets site: Applies to Following Computers: Apple Macintoshes • Performa® 5400, 5410,...
Summary: I have a PB 1400 I installed anew 333 processor upgrade it was defective and I sent it back for replacement. In the meantime. I had switched in a 4...
Summary: Hi Matthias, I went back to the shop today and he let me try the battery before buying it. The new battery didn't help and the problem still remains. ...
Summary: A couple of months back I upgraded to OS X Panther on my 400MHz iMac G3, but since then I have only been running it on the minumum 128MB RAM. To ove...
Summary: Sounds like your RAM vendor is sending the wrong module. Tell them you need one for the Lombard or Wallstreet PowerBook, NOT the Pismo PowerBook. If ...
Summary: I'm currently running mac OSX 10.1. Can I install Panther on my powerbook with having upgrade to OSX 10.2 (Jaguar) first? Basically, can I jump form ...
Summary: i have a PB 1400 and have noticed something wierd ever since i bought it. The floppy drive can only read disks that it formats. i try and use a disk t...
Summary: I bought a 128 mb ram upgrade at a site that advertised it as ram for the mac. My help section on the computer says there is only 1 type of memory ...
Summary: I have a powerbook 1400c/166 which is no longer recognizing the hot-swappable cd-rom. The floppy drive which used this port is working fine. I even ...
Summary: I'm running a brand new dual 866 G4 which initially came with 256MB of RAM. Mac Zone sent me an additional 512 chip a few days later. Anyway, it arriv...
Summary: There's an excellent article out called 25 Reasons why a Mac is better that a PC. Search the archives at MacAddict and you should be able to view i...
Summary: I have only 32 megs of RAM in a PowerCenter PowerComputing clone. I would like to put more RAM in it. What type of RAM do I need and where can/shoul...
Summary: I, too, have been looking long and hard for a RAM upgrade for the 320. It is no longer manufactured, which has made my search unsuccessful. Also, I a...
Summary: hi i need help in obtaining a copy of disk image 17 for the mac os 7.6 install. my powerbook's hd crashed and my disk 17 is corrupt, some wise guy spi...
Summary: it could also be that the drivers for your modem are not installed. i had a problem when i bought my PowerBook 1400 saying there was no modem in it wh...
Summary: I'm trying to get an Eitherlink III 3c589B 3com pcmcia card to work on my powerbook 1400c. When I insert the card the powerbook tells me it does not ...
Summary: Dayna is at Intel now. The drivers for Macs are available at: ftp://download.intel.com/support/dayna Tried the Communicard Ethernet in a Powerbook 140...
Summary: 1) poweron.com OS 9.2.2 is what you seek. 2) For Business: Yes. Keep in mind you will have to buy SOFTWARE too, and probably a RAM upgrade and at le...
Summary: For some reason apple made it so that you can only install 7.5.3 from the original Powerbook 1400 CD. If you dont have one then you either have to b...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
