Summary: Many home routers offer what they call NAT. It is really an improved version of NAT that offers also port redirection (some call PAT). See the documen...
Summary: My company uses an application server in solaris server. that takes a connection at port 46101 then redirect it to another server at another random po...
Summary: This may be hard to explain, but I'll do the best that I can. In general, I have a machine, behind a Linksys router, that has a small series of port t...
Summary: I have been trying to change the ports used by Remote Desktop Web Connection with no luck. It works fine when you leave both ports used by default. I ...
Summary: Hello ! I try to change the Remote Desktop Web Ports for a XP web client. Fount some info here, but the download link does not work any more .. Anybod...
Summary: Thank you both for your great replies! It sounds like machine B will have no problems. However, would I still be able to surf the web from Machine A, ...
Summary: well , i got this under the NAT tab NAT management and port redirection You can use this function to manually create rules to translate IP addresses ...
Summary: Here is the scenerio: Computer 1: Pentium IV Desktop Computer running Windows XP Professional and a Netgear DG814 Router to connect to the Internet. ...
Summary: NAT masquerades addresses: this means that the nat box must be able to answer for internal hosts in some way if these machines are not publicly access...
Summary: read fungus again, he said everything. you will need to have an ip address that is publicly accessible , or configure your proxy to broker incoming r...
Summary: im not sure if your modem can do that, but then again.. i don't know what sort of modem you have. if the option for port redirection isn't available t...
Summary: just check the box to see if the router has a firewall or not. I have a Dlink DI-614+. It's a 802.11b+, so you can run your current 802.11 and 802.1...
Summary: And if you aren't bored/annoyed/frustrated yet, here's some more info that is half Greek to me (I have to say I am really trying though). I dug this u...
Summary: You would have to enable port redirection. In other words, any incoming traffic for port 80 would have to be redirected to the other server's address...
Summary: D-Link DI-614+ wireless broadband router. 1. If I disable DHCP in the router, none of my computers can access the internet. What steps do I take on ea...
Summary: I have that firewall. Open up a web browser and access your router (defaults to http://192.168.0.1). To disable the firewall, Click on the advanced t...
Summary: Yes, what do you want exactly? You can create a bootable MSDOS/PCDOS disk and boot it up in the dos mode and do a lot of stuff. Such as ping, ftp, d...
Summary: iv tried typing in my ip in the address bar in explorer to access the D-LINK modem config. would that help? lots of settings 2 experiment with like: P...
Summary: "when i type my WAN ip address in my LAN - http://IP:PORT)" That is an INVALID test. That would be like asking your router to send the request out th...
Summary: I'm trying to redirect port 80 on 1 machine to go to port 80 on another machine. I have a Linsys RVS4000. I have 2 domains, abc.net and abc.com. I ...
Summary: it needs root acess to modify iptable...and as far as i think...thr shudnt be any entry in the iptables..bcz just i m opening one port with one progra...
Summary: I want to redirect x.115.1.2 port 25 to another email server (x.115.1.5) port. What command should I use to direct port? Any help or tips will be appr...
Summary: Hello, I have an abandoned software that attempts to access a very specific IP address using various ports (6669, 80 and more). I wish to have these s...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
