Summary: I've been reading up on the pci 2.0 and can't figure out what i really want to know. The X38 chipset has pci 2.0 When in cross fire mode. Both cards ...
Summary: The 12V rail powers the mobo and subsequent devices while the 12v2 rail powers the processor only. It requires a compatible mobo to use the second ra...
Summary: The ATX 2.0 specification has a 24-pin 12v rail as opposed to the 20-pin rail of previous versions. Any PSU with the spec of 2.0 or higher will have ...
Summary: I have an older bfg 8800gts oc 640 meg card and i'm wanting to use it in a newer asus bored, but it doesn't have any pci-e slots only pci-e 2.0. WIll...
Summary: The answer is right there in your thread !!! "...or compatible with AGP 4X (1.5V), 8X (0.8v) or Universal AGP 3.0 bus configuration (4X/8X). " I don't...
Summary: How can i find out if the PCI slot my video card is using 2.0 or greater? I'm thinking maybe that is why im having some conflicts with my video card. ...
Summary: My Trust USB 2.0 pci card seems to be working fine on my computer, windows xp runs normally. That is, until I plug in my ipod into one of its ports, ...
Summary: Hey people sorry to bother you again, I have got this Old computer up and running and I have been working on it to get it to run smoothly. I mainly us...
Summary: Hi there, I have recently purchased a USB 2.0 PCI Card for my computer - but it doesn't work!! Does any mobo support USB 2.0? onboard are USB 1.0 port...
Summary: As far as I've read, all socket T mobos are compatible with the new power strip specs. Besides, the newest ATX 2.0 psu's also come with an adaptor to...
Summary: Is it possible to connect a PCI card with USB 2.0 ports to a motherboard that has only USB 1.0 ports? or must the motherboard have USB 2.0 ports from...
Summary: A friend recently bought a Cendyne USB 2.0 PCI card (based on the NEC chipset) & asked me to install it for him. I believe this is the same card: http...
Summary: Hi... I own a intel 915 motherboard that has a pci-e interface, probably its version 1...I am planning to buy ATI 3850 in two days but the problem is,...
Summary: I plug in the pci usb 2.0 card and power up the comp there is nth on the screen not even beeps. When i plug out the USB 2.0 pci card and reboot the co...
Summary: Hi, I'm just wondering if it's possible to use a PCI card for USB 2.0 (http://www.ebuyer.com/customer/products/index.html?rb=4407628119&action=c2hvd19...
Summary: I read in another forum that the PCI-E x16 and the PCI-E 2.0 were reverse compatible. Basically complete opposite of each other so no I dont think the...
Summary: i have a linux distro that i use on a usb flash drive. it works on the 1.1usb motherboard ok but is a bit slow. my bios wont pick up my 2.0 usb pci ca...
Summary: I have found a sort of work around. I have now got a PCI USB 2.0 card (based on NEC Chip) and my HDD enclosure finally works without dropping out on l...
Summary: I went with Firewire before the USB 2.0 came out so I've stayed with it, but I've also seen where a lot of the companies selling Firewire also carry t...
Summary: well for a flash pen yes im sure it will work its only really things like certain printers and hard drives that use usb 2.0 that demand the fast data ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
