Quick Links
Computing.Net Solution CenterDesktop Access to SearchAsk a New Question
Sponsored Results for: pc wont boot after new chip is installed
Search Results for: pc wont boot after new chip is installed
Product Search Results
Results
1 - 25 of
14574
- higher confidence,
- lower confidence
pc wont boot after new chip is installed Summary: Hi, i recently decided upgrade my 600 mhz celeron processor to a 1.2 celeron, but after having installed it, the pc doesnt boot up. the monitor just f...
PC Wont Boot Sometimes! Summary: This is not a big deal but every once inawhile my pc wont boot the first time; so I restart again and its boots fine. Any suggestions to solve this pr...
PC Wont Boot - CPU frequency Summary: Thanks for your help Hooner, I managed to reset the CMOS. Any ideas why I cant get this CPU running at 133GHz. I tried setting the External; Freq. to ...
custom built pc wont boot Summary: my buddy is working on fixing a cusom built pc and is having a bit of a problem. it's got a new mobo and a new processor but it wont boot. everything ...
O/c error when new ram is installed Summary: Cpu: P4 2.0 ghz Mobo: Asus P4B -------- I recently just bought 256 MB's of PC-133 SDRAM off a buddy of mine, I brought it home installed the ram into ...
wont boot Summary: Hola.. Pc wont boot, motherboard led comes on, keyboard lights flash, fan starts, can hear HDs start spinning, but nothing on screen, not even BIOS, n...
1.2 ghz athlon k7s5a wont boot os Summary: I have a k7s5a and a 1.2 athlon. When running at 100/100 it works fine, but the speed is only 900 mhz. When i switch to 133/133 it goes to 1.2 but wi...
cant get bus speed past 146 Summary: thanks guys - ok - HotShot - wot CPU r u using?? coz with my AMD2400 i cant set my clockspeed any thing other than the auto setting, if i do my pc wo...
PC freezes after new V.C. install Summary: Greetings everyone, I recently purchased a Jaton Nvidia Geforce 3dforce 6600-256 video card to replace the Geforce MX 4400-64 that was previously inst...
CPU wont boot , Summary: yo , im having a problem , the pc was booting up before , but now it wont , i was installing a new heatsink - thermaltake volcano 12 , checked everyth...
PC Wont Boot....motherboard? Summary: Ok, after just formatting we had alot of problems reinstalling Windows XP, because the disk we was using to recognise the Serial ATA drive....was a b!...
Blank Boot after new mobo and CPU Summary: i have a pcchips MB with 533 MHz fsb - i am having the same problem things hum but nothing booting up - i also just replaced my processor with a P4 80...
Fried AMD XP,tried new chip,wont boot Summary: I recently put together a system and had it up and running for a day. Brand new GA-7DX board w/ AMD XP 1600+ cpu. The damn heatsink fell off and the c...
Help ! cant boot after bios mess up Summary: HELP ! I can't boot after changing the cpu clock speed in BIOS. System is an Athlon 1.9 GHz, KT7A mobo, radeon vga graphics card etc. System was alwa...
PC dies after cleaning out of dust. Summary: My pc was overheating so i open up the case a hoovered up the dust.. i went to remove the heatsink to get rid of the dust in the plates. however it p...
pc wont power on, i believe cpu is dead Summary: when i power on a newly build pc for the firt time, the fans spin and the front power led lights for a split second then nothing. i believe it is a de...
brand new 817LR + XP1700 wont boot?! Summary: When I tried the XP CPU the computer wouldn't post. I tried switching everything inside my PC and I guess that it was the CPU that was screwing everyt...
kt600 plus wont boot at 166 Summary: im trying to set my FSB to 166 for my 2800+(which is optimal speed). right now it will only boot up when jumpers are set to 100 mhz. the manual call...
Computer wont boot at all!!1 Summary: If your system is recognising your drives you must be reading this on boot up? IF this is the case your monitor is working, if not, check and make su...
HELP. Computer wont boot at proper Summary: I have an Athlon 1800+ XP Processor. This should run at 1.533 MHZ. When My computer boots it shows me 1150 (1.15 Proc). Doing research I see that I n...
A7V133 wont boot Windows Summary: Nope. It is a Rev. 1.0. The Floppy is installed correctly. Because it can load anything from DOS but can't boot windows. ...
My PC cannot boot Summary: Hello, This morning I found my PC cannot boot. Last night it was ok, got no problem until when I tried to turn it on today. It doesn't sound "beep" li...
AMD vs. Intel: The new chips on the bloc Summary: For those of you who wanted a good website about AMD's new chip here is one that compares it to intel's new chip Itanium. http://www.theinquirer.net/?...
New Built PC Wont Start...PLEASE HELP! Summary: what do u mean by get it out of the case? the pc wont even start - makes no noise... Please help ...
wont boot from cold Summary: When the computer is cold wont boot up first time get message windows needs to start normally, I have a gf4 440 mx card works very well once booted up...
Jump To:
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | >>Sponsored Results for: pc wont boot after new chip is installed