Summary: I too am having the same problem and have been convinced for quite some time, that pc to phone is garbage. Is anyone else finding it to be super bugg...
Summary: After the error message, you should be able to continue to see what FDISK is seeing. What drives does it see, and what partition information does it s...
Summary: Have Win ME & Win XP on same computer a PII with an Asus CUV4X motherboard. My HP 600 monochrome printer is functional in Win Me but will NOT even in...
Summary: It has been a while since I installed such a card, but one thing that I seem to remember is that during the install it asks for the path of the driver...
Summary: I have a megnavox 386sx computer which did not come with a boot disk.Can u please locate one for me?The computer also will not take extened memory up ...
Summary: 1. Which OS/2-Version do you have? Probably 3.0. In order to have more than 1 OS on your PC you will need a boot manager. A good one comes with OS/2 B...
Summary: I just hound this about Bochs - old version and I haven't tried it yet. I have fond memories of running OS/2 in 1994 and have been keen to try it. At ...
Summary: Hi, I'm trying to install Warp 4 on my PC which already has Win98, Linux & BeOS on it. After browsing these forums i've persuaded the installer to rec...
Summary: I bought new Pc Amd XP 1700, 512 MB ddr, Soyo motherboard Dragon +, NVida gforce2 Ti,and ran it for about 1 month when it started showing an error at ...
Summary: You should set it to OS2 for > 64Mb, because OS2 has a particular way of addressing ram > 64Mb. It will not affect your other OS. If you set it to non...
Summary: According to IBM, "OS/2 Warp is an advanced 32-bit operating system that runs both 16-bit and 32-bit applications on systems with as little as 4 MB of...
Summary: Continued next morning :) I forgot to mention that if you are installing Os/2 of any version on to a drive letter (primary or logical drive), other t...
Summary: ive gotten a couple of emails about a post i placed in the os/2 forrum about how i have so many operating systems on my system and how to do it also o...
Summary: p3 733 mghz 128 sdram 20 gig hard drive ok here's my problem , i accidently knocked my pc when it was booting up , the hard disk stopped working and i...
Summary: Hey y'all... I'm having problems. I installed OS/2 v1.3 on mmy computer (for kicks, one might say) and it installs OK. But at bootup, it tells me that...
Summary: hi, i go in the back direction of you, i migrating slow by slow to os/2. recently i have a big trouble with windows. in the cybercafe i use to navigat...
Summary: I have OS/2 Warp 3, and im trying to install it on programs lke Virtual PC, Vmware and the like. Problem is, altho they can read the installtion diske...
Summary: I have the same hard drive. And have experienced the same error. I kind of "tricked" my way around it. OS/2 install is "stupid". All you have to do...
Summary: I tried BM from PowerQuest, ver. 3.05 (currently they call it IBM Boot Manager) on HDs up to 8G - when installing NT 4 and W2K PRO final release. In b...
Summary: I've been attempting to install a Zip 100 as PPA3 onto an Aptiva running OS/2 V3. I've tried everything .... got the right OS/2 downloads and tried ...
Summary: There is a tool called Theseus2 (do a search on t2spm.zip on hobbes) this tool when properly installed, (it has a device driver that allows for it to ...
Summary: This might be helpful: the errors are logged in \ibmcom\lantran.log - this file contains any errors found while initializing your NIC. OS/2 gets the ...
Summary: I've never installed ver. 3, only ver. 4. Maybe my comments will apply ... or maybe not. It could be your problem isn't the CD but the size of your ...
Summary: Is OS/2 installed on a machine which also has Windows 9x? If it is and Windows 9x is install with a FAT 16 partition, then OS/2 will see the WINDOWS ...
Summary: I have Warp v3 rev 8.200 When the PC boots a message comes up stating it cannot find the desktop. I can get the DOS window and have run chkdsk which ...