Summary: Hi, I just installed linux slackware using "fips program" to partition my hardrive. But i made a mistake when i did it. Now the problem is this: Th...
Summary: Neal; You probably have: a Primary Partition, and an Extended Partition on that 40Gb HDD at present. You'll have to use FDISK (or other Partitionong ...
Summary: Colette, Try out DATALIFEGUARD from Western Digital. I have used it several times to remove NT and Linux partitions. Some people don't like it because...
Summary: It depends on whether the problem is just booting the system from the hard drive or not. If the partition table is still present fdisk /mbr may work. ...
Summary: Heres my drives.../partitions C:\> 1.8 gigs primary D:\>1.8 gigs primary F:\>165 megs primary I have Windows XP on my computer's main drive(C:\...
Summary: You will need to set the second partition active. And maybe unhide it. I use Partition Magic instead of Ranish. To install a new OS I set it active...
Summary: I have a primary partition and two logical partitions. Windows sees these just fine, but DOS doesn't! It only sees C: . I've tried booting with F8 (Co...
Summary: Ranish Partition Manager runs in DOS and is only about 100k in size. Works very nicely in my experience for resizing/creating partitions and for solv...
Summary: i reformated the hard drive and used my boot disk, i opened fdisk on my boot disk and partionied my hard drive c:, it displayed the wrong amount of of...
Summary: I have an old Fujitsu ICL computer. It has an 6GB harddisk. I installed linux and DOS/Windows on it. Is there a program i can use to repartition the h...
Summary: As long as you haven't written to the partition, you should be able to get your partition back.. First, I'd suggest you get Ranish's Partition Manager...
Summary: I would try some other things first... IE try a linux boot disk. I have had a case where dos could not read or only partaly read a dos drive. But w...
Summary: I have a 486/33 laptop with a 1.2 GB HD. I deleted all the partitions with fdisk, but now fdisk only recognizes my HD as 25MB. This happened one other...
Summary: have 1 hdd, and 2 primary partitions. C:[OS] D:[DATA] i booted from winxp reinstall cd to delete my C: partition. my D: partition automagically rena...
Summary: ok i've got a partition problem of my own. I recently got the undeniable craving to install every OS i could get my hands on. The setup is as follow...
Summary: Thanks everybody, indeed it was "active partition" problem, I managed to partition it on one primary and one logical disk... thanks again! ...
Summary: Run FDISK /STATUS at a dos prompt and email me w/ the output. Sounds like your secound drive has some partition problems. You may have to run FDISK /...
Summary: Compaq's can be a problem when partitions are concerned. We have them at work and constantly have problems if they are switched off at the wrong mome...
Summary: I have the same problem as mike, however the program listed only resizes partitions and does not affect the HDD size. It is also only suitable for FA...
Summary: Sounds like a cluster... You need to keep in mind that if you are using image files you must run the rawwrite batch file for each disk seperately. Th...
Summary: There might be something physically wrong with the drive or it might be a partitioning problem. To eliminate partitioning I would download WIPE....
Summary: Download LapLink3 for DOS from my web page and run the software on both computers. LapLink will work without regard to partition type and LapLink doe...
Summary: i copied a backup image of dos 6.22 partition to my hard drive #2, it was originally on hard drive #1 (had partition problems). when i booted it i got...
Summary: The problem is that dos/win fdisk doesn't "understand" linux partitions Go to freshmeat then click apps/console/mini distributions and download the mi...
Summary: No, it's true. Versions of DOS up to 4.0 only support FAT12, i.e max 30 MB hard drive. Versions of DOS up to the one that comes with Windows95 OSR2 su...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
