Summary: I have a P4 1.8 Ghz CPU with 500W of power supply unit with SIS 650 Mobo. 256 MB PC133 RAM. It is a jumperless mobo. 400Mhz FSB speed. 512 Cache.Alr...
Summary: i have p4 1.8 and soyo p4isr mobo. i tried to overclock like i read everyone was able to do on this forum, but ran into some problems...in my setup ut...
Summary: I am overclocking my P4 1.8 on an Abit BD7ll motherboard. I've got it up to 2.4ghz no problems running on 134(cpu fsb)/88(AGP)/44(Pci) The PCI and AGP...
Summary: Can I overclock P4 1.8 GHz Northwood (512kb cache) to 2.0 GHz if I have only memories DDR 266 ??? Is it safe? I have Asus P4533 motherboard. THANK YOU...
Summary: im running a p4 1.8 on an ecs P4VXASD2 V3.3 and i need more from the system.will this board overclock the processor if so how!!!!!any info is apprecia...
Summary: Hi, I've got a P4 1.8 ghz overclocked to 2.4ghz. The idle temp. sits around 32-40 C and CPU temps go from 46-56 C. I think the temps are running a bit...
Summary: Very limited coz the multiplier is locked. The only way you could oc it is by increasing fsb,core voltage etc. But you'd need a really good board fo...
Summary: Hi, I have a p4 1.8 ghz, 400 fsb, northwood core. i have it set at 125 fsb multiplyer, it idles at 39 C, and right after 3dmark2001 SE it was 47 C. It...
Summary: I have 30-31C temperature on my processor is that good or its too cold(if too cold is possible)! i have it overclocked fro 1.8 to 1.94 but there is re...
Summary: I have a p4 1.8 northwood @2600mhz on a abit bd7II with 256 pc2700ram,and a 20 gig maxtor 7200 rpm.Ran stable,but after installing A wd's 80gig 8mb ca...
Summary: Im new to overclocking and id like to get more performance from my processor CPU:Intel P4 1.8 ghz with 256 kbs cache I have a ASRock P4AL-800/P4Al-80...
Summary: To overclock it to 2400 MHz change the FSB to 133 in the BIOS. The P4 1.8 A is a good overclocker. If it doesn't POST clear the CMOS and run it at 100...
Summary: Please help me overclocking procesor P4 1.6 in Intel D850GB motherboard with 256mb PC800 ram.. i need sone advise how to start, what to do , how to un...
Summary: guys, could you help me to overclock my computer, p4 1.8ghz. i dont have any idea on how to overclock it. could you help me on this. thnks. ...
Summary: Your P4 would not be fried even without heatsink and fan. It will stop running, but will not be fried as tested by Tom's hardware. AMD will be fried...
Summary: i am a current noob on overclocking with p4s. i have overclocked amds very easly without overheating but with p4s im having difficulties. first of all...
Summary: Hello just wondering ive recently overclocked my P4 1.8 to a 2.4 . The tempratures are at idle of 44/45oC and about 55 to 60 on a full load. I was won...
Summary: I have a 1.8 P4 clocked at 2.4 and its running fine. But my temp has gone up a few degrees to about 110F.... was always arounf 90F... will this hurt i...
Summary: I have a mercury KOB P4M266 NDFSMX motherboard with VIA VT8751 chipset and p4 1.5 ghz.I cannot increase anything from the bios as it sets back to d...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
