Summary: I'm not sure that I can help you, but I'll give it a try. I just bought myself a used IBM 760EL ThinkPad, preloaded with Windows95. I anticipate sever...
Summary: Installation fails on disk1, it hans when loading the pcibus.snp file. I downloaded and tried the latest pcibus.snp file from ibm, but to no avail. H...
Summary: Hi: I have an IBM Thinkpad 760 ED with a swappable CD-ROM/diskette drive. I can't seem to get OS/2 to recorgnize both of the drives so I can swap t...
Summary: I have tried installing Warp4 on 2 IBM 300PL with 500mhz cpu's. I have updated install diskettes for 8.3gig plus hard disks. After copying files the i...
Summary: Look at the Device Driver Pack on-line, with the section systems. There all ThinkPads and the appropriate drivers are listed. Normally, OS/2 should ...
Summary: Hi could some one point me in the right direction to connect a warp 4 box to a win nt wan from the command line.(need to be able to run a batch file t...
Summary: Hi, Ray I have read a rumor about W2k saying it is blatantly unsafe to use together with Boot Manager, whether from OS/2 or from Partition Magic. It ...
Summary: Hello, I have an IBM Thinkpad 760C with a CD docking station. I have the new installation disks with large hard drive support, as I have a 6.2 Gig ha...
Summary: I've installed OS2 Warp4 on several newer computers HP Brio,Compaq,Dell.All machines were above 400mhz.Only problem was very large drive on new Dell.T...
Summary: I would like to install OS2-warp4 on my P3 computer, but I can't seem to find the installation flops. Can you, or anyone you know, mail them to me? As...
Summary: 'Have a 3dfx voodoo3 3000 PCI 16MB for Compaq Prolinea on OS/2 Warp4. 'Tried several times with latest os/2 fixpaks but failed. 'Highly appreciate ide...
Summary: Ok, I have a bit of a problem and I hope you can help. My aunt recently purchased a used IBM Thinkpad 755CD laptop with two harddrives clean harddrive...
Summary: I recently acquired an IBM thinkpad 755cd. I knew it was old but the price was right and it has never really been used. (i.e. no extra software) It op...
Summary: The advice to acquire a "real" copy of Win2k is well taken. I had been avoiding it because it would leave out some of the facilities that are on the r...
Summary: I have purchased a copy of Smartsuit which calls for OS2/ Warp4 with fixpack 6 or higher . But now forced by customer requirements to change my Operat...
Summary: I'm having roughly the same problem, floppies don't seem to hold up very well. I have the original disks for os2 warp (v3, i think), given to me by a...
Summary: Hi, We have an OS2 server running a certain application and when we reboot the system, the server wont boot anymore. There is an error message statin...
Summary: We are trying to install IBM's Convenience Package for OS/2 Warp4 on our existing voice mail system that runs OS/2 version 3.01. When we attempt to lo...
Summary: I just got os2/warp ver4. for A system I just built. I have a blank 13 gig harddrive. How do I install on it. All I get is partition errors. ...
Summary: Trying to install OS2 on athlon 64 x2 4800, gigabyte k8nxp-9 2gb ram. 2 maxtor serial ATA 60GB hard drives.I have the new Dani drivers. I also have th...
Summary: I have had some trouble setting up the network devises for warp3 on MS Virtual PC -- anyone have some suggestions on which NICs work and how to get th...
Summary: I needs direct links to the following files. OS\2 Warp 4.0 latest fixpack or 9 OS\2 Warp Connect 3.0 ltst fixpack OS\2 Warp v3 latest fixpack or 39 ...
Summary: Im hoping for some help here as i am losing my mind. I managed to get os/2 installed into connectix Virtual PC 6 with really no problems but whenev...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
