Summary: What the heck can I do with this old thing? Tandy 1000 TX personal computer with keyboard and CM-5 Color monitor but no disks or hard drive. It came...
Summary: I've got this old Tandy 2500xl that's been out of use for a while, but I would now like to retrieve some old programs and documents from it's hard dri...
Summary: Hi, i know this probably isnt completely related, but i recently found my old Tandy, and i threw out the monitor months back thiknig i would never fin...
Summary: hello if you goto the local good will or salvation army or other thrift stores you will most likely fine a whole working tandy compter for $5.00 or ...
Summary: That cord is definitely for the power led, I know because my old Tandy’s psu has one and it goes to the power led. You are SO lucky you didn’t blow yo...
Summary: What size was your old hard drive? I doubt very much whether this old Tandy bios supports a 20 gig drive - if you're lucky, it might be 1.x gig; if yo...
Summary: Pat is right. Low level format on an IDE disk is not to be recommended. Low level format is done by the manufacture when the disk comes of the assem...
Summary: Hmm, not bad, I have more parts: Mitsubishi 5 1/2” Floppy Drive MF 501B-347UA Tandy 1200BPS Modem 25-1013D Western Digital Video Card 61-603235-West...
Summary: Hi, First I put up this topic in the Windows XP Forum, then I realized it might be relevant to place it here as well because it may be hardware-relate...
Summary: you wanna talk about keeping old machines?? the oldest PC i still have is a: Tandy (???) 20mhz 386 4mb RAM 350mb WDC hard drive 14.4k ISA Modem Integr...
Summary: I have a really old computer that's just dragging along with Windows 98...boots up in about a day and a half. Wondering if I could build a new compute...
Summary: I just bought 512 MB of PC2700 DDR RAM, and installed it in the same slot as the old DIMM was, and this old 256 MB one in the other slot. Read on, ple...
Summary: I've been given an old PC, the mobo is a gigabyte GA-586HX running a p133 and 16 Mb of RAM. I've found some old EDO ram and it now has 48Mb and appea...
Summary: ok, well ive got htis old computer which i plan to put linux on. i had to take the motherboard out of the case to clean the case and i probably should...
Summary: hey guys.. I hav this real old comp and i wanted to take some parts out of it and put it in a not so old comp for my gf. Anyway the HD has Win98 insta...
Summary: Hello! So, i've been slowly updating my computer as i go along, with new pieces of hardware. It reached the point where i felt my hard drive was bottl...
Summary: How will they get a modem driver if they know which modem they have? Do they have access to anther computer to do the download and transfer or will t...
Summary: There's no point in doing what you'd like to do with that old PSU. Even with a 4-pin 12V plug, the PSU still probably doesn't have enough amperage on...
Summary: I have a Dell Dimension 4600 with Windows XP OS. The motherboard was fried by a surge. Absolutely nothing happens when I plug it in and turn it on. ...
Summary: Hey guys. I am wondering if i take an old AMD (1.2 Ghz) that ran off 168 Pin PC 133 RAM and put it in a new Motherboard with PC2100 (DDR266) running a...
Summary: I have recently.. "semi" restored this old old computer which I belive was made ( or hte mobo anyways) was made in 1998. It has PCI and ISA slots on i...
Summary: I am not even sure the exact specs on this machine, nor does anyone else at the company. It has Win95 on it which needs to be reinstalled due to some...
Summary: Hi, I have an old computer with a Pentium 3 750, running windows 98. I need a new 3D card for this thing, but I have no idea what to get, or even if I...
Summary: Does anybody remember these old computers? Need to access BIOS to reassign IRQ, having hardware conflict... Bought an older Gateway 2000, 486 noteboo...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
