Summary: H guys Is it safe to keep jumping to and fro between used oc settings and default settings? i.e I can use 200fsb with a multi of 9.5 default is 133 & ...
Summary: If you took the cpu fan off and later smelled smoke, that was the frying of your non-thermally protected amd cpu. btw you are attempting cpu oc jumps...
Summary: I recently updated my bios to ver.1014 which gave me better overclocking functions. Now I can manually set my multiplier which I couldn't do before a...
Summary: Definitely install OS first! U need software to run to see if your OC settings r stable and/or to run a benchmark. I have same board (Deluxe ver) and ...
Summary: Heh a lot of posts for two blokes eh? :) I just set everything back to standard and got ~4300 PCMarks. Not really much of a jump considering that the...
Summary: Ok, I understand why all of the other AMD Athlon 64 FX 6x series are jumping in price due to the soon to be released AM2+ 4x4 platform, but why is the...
Summary: I am trying to oc my 2800+ My temps are fine, like in the 40s. My cpu becomes unstable however before i hit 174 on my fsb. The only voltage change m...
Summary: BTW... 2 notes that I discoved in all of this for anyone that cares: 1 - I've read that people say the readings from this mobo are lower for the CPU. ...
Summary: leave it OCed and then put a real heavy load on it like sisoft sandra or 3dmark. then check your temps after 10 mins and look for any glitches. if the...
Summary: hi i'm trying to oc my prossesor but when i go to my bios to chang the oc it it restarts and says i have to reset my overclocking function. I'v try us...
Summary: I'm messing around with my processor's frequency and voltage. I just obtained a new cooling system. I was able to OC my voltage and frequency from 2...
Summary: 1858 is about 2300+ for Throughbreds and 2500+ for Barton. Just to let you know not that important. You have overclocked from 2100+ to 2300+ which ...
Summary: This is the best comparison I've ever seen of amd vs intel is Zroc's thread in the link below, and the rule of thumb the whole thing boils down to is ...
Summary: The best you can do is use a program called clockgen, but you won't get very far considering you can't lock the agp/pci bus. Other then that you can ...
Summary: I hear the 2500+ is a great cpu to OC. I found an article that said it would run at 200x11, just like 3200+ at standard voltage without much trouble. ...
Summary: Alright I just replaced my heatsink/fan on my geforce 4 mx440se, I just tried overclocking it. It scored 3550 (3dmark 2001se) on stock 250 core 333 me...
Summary: "im sorry but i still dont notice it! it all comes down to what you do with your computer like i said if you do photoshop then you should oc it will h...
Summary: Does anyone have some good info/experience with this card? On the card itself its tagged as a Geforce4 TI4400, 128MB. But it was sold to me as a 4600,...
Summary: I can't oc my 2600+ either with the fsb our with the multiplier.When I did it my frecuency fell back to +/-900Mhz. (it's on a A7N8X Deluxe) ...
Summary: ok i ant got thaqt much money at teh mo so i was wondering how far i can push my cpu and geforce 4 will a softwair oc program for the geforce work and...
Summary: well, try upping the voltage 1 setting at a time until u can get stability at 200 fsb...i have an nForce 2 ultra 400 mobo and i'm at stock voltage wit...
Summary: "i stumbled across the XP2400 at £54 and got it but found out id got the 1.8 vcore version " amd does not make a cpu with higher than 1.65v vcore. Ma...
Summary: I'm OC'ing my Xp 2000+ for the first time with success, except my on-board sound wont start. It's set to Auto in the BIOS as always so should be worki...
Summary: hey guys is there anyway i can oc my dad's laptop? its a dell latitude cpx 500mhz 512 pc100 144pin ram i heard i can oc up to 650mhz easy ., but i don...
Summary: Hello, I have watercooling and oc'd my AMD XP 2000 and have it running at about 1800mhz and stays at 38C temp. I was thinking about getting the AMD X...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
