Summary: can somebody please assist. i have ntldr and boot.ini file problem which i am trying to solve. i found a post from a while ago that was looking promi...
Summary: Hello I am having trouble setting up a dual boot for my system. I have two hard drives, both IDE. One is drive(0) and the other is drive(1) I have XP ...
Summary: Could you please just write my boot ini out - just the multi.... paths, ill do the rest. Its just that I have tried writing it approrpriately, and it ...
Summary: I have 2 HDD's. 80Gb (backup), 40Gb (WinNT-2k-XP) I originally had 40Gb HDD on IDE1(ATA133) as master and 80Gb HDD on IDE1(ATA133) as slave. BUT I wa...
Summary: If you install the OSs on their own HDD with only that HDD in the machine, then your comment "Non of these OS's share a drive" would be correct. If, o...
Summary: I'm assuming you actually have two physical hard drives, not one hard drive with two LOGICAL drive partitions, which is what brand name systems come ...
Summary: Ok UPdate 3: Now everytime I turn on the computer it says: disk boot failure, insert system disk and press enter The computer will not boot unless the...
Summary: I too feel that i have screwup my harddisk. F10 which was suppposed to be for system recovery is not working. I got a message that "OS not found" when...
Summary: This is where a XP formatted floppy with NTLDR, NTDETECT.COM and your BOOT.INI files on it would come in handy. This would boot you to the GUI log on ...
Summary: Have a home built machine. Had a 80 GB ATA HDD. About 6 months ago, bought a Maxtor Sata 150 card and WD 36 GB 10,000 rpm HD. Plugged both into the ...
Summary: It's been mis-spelled twice so far - NTLDR, not NTLRD (NT LoaDeR) ........ You don't have to do this, but I recommend you do this. If your hard drive ...
Summary: I just installed Win XP pro on a previouly blank hard drive--The setup seemed to go very well, but when I rebooted my computer these two lines appear ...
Summary: Hello, This problem is the culmination of many months of frustration. My grandpa (who is very computer literate) was planning to run a dual install...
Summary: My first post! I got a problem one day, when I switched on the computer I would get a 'keyboard not detected problem'. This is a PS/2 keyboard. So I t...
Summary: Upon doing ALOT of research, I discovered that when I ran the win XP install the first time, it re-wrote my master boot record to the new versrion tha...
Summary: Help, i got a virus and avg must have deleted part of my boot.ini files as my system will not boot up. The message certain files are corrupt and missi...
Summary: I have a Seagate Barracude 80 GB Hard Drive and am experiencing some very frustrating problems. My problem began when I ran a network in my house. Wh...
Summary: Ok I see a "metal mounting post" is a standoff. I've checked on that and everything seems ok. Everything's going fine now with the computer except t...
Summary: Since you have already re-installed XP on your C drive,and you also have XP on the D drive, both versions of the operating system use the same bootfil...
Summary: The first thing to try is to boot from the Windows XP CD. Go to the Repair Console via the first repair option you get. You will need the Administra...
Summary: i reinstalled windows xp onto my other computer after not being able to fix a problem. when i try and boot up with the slave now installed it always r...
Summary: hi,i have an hp pavilion 520n,i have a problem booting windows xp pro.at first i;ve been told that i had to boot it up with the boot.ini file with a f...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
