Summary: I am working off a Toshiba Satellite T1910 486. I'm running DOS 6.22. When I turned on the computer today I received the non-system disk or disk erro...
Summary: I have an 80286 system i'm goofing off with. I was reading a floppy in the A drive(of course). The power went out and when I restarted it. It was...
Summary: i recently installed an hsb(apache) m/b, with a cyrix 686(266mhz) chip, i have 48mb of memory and two rather old hard drives(135mb, primary master:426...
Summary: I formatted my computer, and then went off to install DOS 6.22. It said I need to reboot so I did. Then all I get is "Non-System disk or disk error", ...
Summary: Everytime I boot up my computer it says Non system disk or disk error...but the thing is, there is no disk in the a: drive..i even went into the bios ...
Summary: I got a compter for free, which worked fine and gave me the DOS c: prompt, but when I got it home and booted it up, it gave me the message non system ...
Summary: When you "SYS" a drive--floppy or hard drive--you put the system files on it including Command.com which is not hidden. "Non system disk or disk ...
Summary: Hi, just trying to get a toshiba 3200 "portable" working... Hard drive was formatted, when dos disc (3.3 and 6.22) are inserted in drive, I get "non s...
Summary: I have a 486SX-25mhz which I am trying to install Windows 95. I have jumped the gun and have refomatted my hard drive using the command format c: with...
Summary: I hav ms dos 3.1, i want to reboot it, i hav a start up disk, i would like to kno what i type in at (non system disk or disk error A:>) what command s...
Summary: 486 SX 25 mhz. We f/disked PC. Thought we had a bad I/O card. It wouldn't read the Dos boot disk to cont F/disking it. Installed a new I/O Card an sti...
Summary: a freind of my dad gave me a old laptop\ phoenixBIOS A286 vr.1.00 640K ultralite 286F reference Id 10 no cd driver ___ When i turn it on it tel's me ...
Summary: I'm trying to get an old 486 machine to work. The battery recently went dead, so I replaced it. Everytime I tried to start the computer, I got "non ...
Summary: I thought i would take a look in the old AT case too see if any wires were lose. I noticed that the cd-rom which uses somthing similiar to a jewl case...
Summary: Mick, Got PC-DOS 5.0 Bootdisk from Powerload.fsnet computer still not working. I boot with this disk and error message now says(NON-SYSTEM DISK OR DI...
Summary: Any 98 or ME bootdisk will be able to partition and format it. If the drive is larger than about 64 gig you need the ME version of fdisk or the updat...
Summary: PLEASE HELP ME! When I unearthed my dinosaur "386-BIOS ATI VGA WONDER BIOS V4M-1.00, AMERICAN MEGATRENDS" it worked fine. Today I'm stranded. Everytim...
Summary: When I turned on my IBM/PS2 computer today I got a non system disk or disk error. I then put in a boot disk and it said the same thing. The hard drive...
Summary: Hi, When I start up my , Tandy 1000 TX , it displays memory , the bios , and then it displays "Insert System Diskette and Press any key when ready" I ...
Summary: i need help with my harddisk because when i boot my computer it cant boot from the harddrive .. i changed setting in bios so i can boot froma boot dis...
Summary: I have compaq laptop ARMADA 1592DT. It gives problem like some time it boots properly but most of time it says non-system disk or disk error repalc...
Summary: This computer cannot detect HD parameters when I go to Bios. When I try to boot from a: I get boot diskette request. I have tried DOS 5, 6 and Win 95...
Summary: help i just formatted hy harddrive and it had a c:\. i shut down and restarted the sy7stem and now it keeps telling me to "non system disk or disk err...
Summary: Hello, I just recently acquired an old Tandy 1000 TX which still works, but there is one problem. The message "Non-System Disk or disk error. Repla...
Summary: I replaced my old hard drive with a new 6.4g. I installed a BIOS flash upgrade, partitioned the new hard drive, formatted it, booted with DOS 6.22 Dis...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
