Summary: That site redirects to the wanadoo site, which is having problems for the same reason every other site is having problems - Apple has severely restric...
Summary: IMac 233 startup requires "warmup" After several years of dependable service my IMac began to require a "warm-up" period before it would actually st...
Summary: when i press the power button on my imac the green light flickers continuously but there is no life in the imac or the hd could i swap the psu with an...
Summary: I have read on this site the same problem I seen on several 233 Imacs- dead video. I work in a repair shop and have figured out how to test the "r...
Summary: iMac family is M4984. Not sure of CPU, ram, etc. When I turn the power on, it chimes, I hear what sounds like the monitor powering on, but the power-...
Summary: I am having a problem of getting only momentary power to my iMac (G3-slot loading), and am wondering what I need to replace (logic board, power supply...
Summary: I posted the message “black screen of death on Imac” last week, but I thought of opening a new case because this seems like a well known problem with ...
Summary: Eureka!!! I had purged all software except the system files and the monitor stayed on, still B/W but on and then reloaded all the system software as ...
Summary: it is very easy to modify the firmware. to get to the firmware, hold Control-OPtion-O-F after you power on. you should get to the firmware prompt...
Summary: Can't get power on LaserWriter LS I was given an Apple personal laser printer LS. I want to use it on one of my PC's. However, I can't get it to turn ...
Summary: Attempted to install 2x256MB PC133 into Wallstreet Powerbook. CPU and old memory removed to for install. Memory installed ok, but Powerbook booted ver...
Summary: Please help. I have searched for hours and have not been able to find the answer to this problem. The monitor on my iMac 233 is gone. I opened it u...
Summary: A new problem I'm having with my iMac G3/400 DV slot-loader...when I boot the puter, the screen won't turn on. I can hear the machine going through i...
Summary: I have my sister's iMac that I am trying to fix. I don't know too much about Macs (I'm a PC guy, sorry.) Any, when you turn it on, either on the fro...
Summary: Hi. I have problems with the Sleep function on my iMac DV 400. It will go to sleep if I tell it to go to sleep manually via the control pannel/control...
Summary: How do I check or check my firmware? Also another hitch to the problem. We had a power hit here today and lost power for about 5-10 minutes. In that t...
Summary: Power failure with my iMac 233 (rev b) running OS 10.1.2. After the power light turns from orange to green, the power shuts off. I can not start ...
Summary: Im having a similar problem and need someone to shed some light on this. My iMac 350 slot loading edition gives me the startup chime, monitor comes...
Summary: I'm a Mac newby, so bare with me. I bought an older iMac ( G3 333MHz) 5 Flavor, 1999)and when I got it it had OS 8.6 installed. The power button on th...
Summary: I have a Rev. D (333mhz tray loading) iMac that doesn't seem to boot - when turned on, I get a chime, the HDD spins up and the CDROM tray can be opene...
Summary: Hi Friends, I am a PC user for last 15 years and quite a H/W freak. But recently, my friend loaned me his iMac and it changhed my world.. how ..!! si...
Summary: Howdy. I've been running OS X v.10.2 on an original iMac 233 for quite some time with no problems. To address your problem...sounds like either y...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
