Summary: Started with windows 3.1. I formatted drive c in hopes of installing W95. Downloaded a W95 boot disk from bootdisk.com, used this with W95 cd and rece...
Summary: Regarding my previous post,(no drives found),W98 or W98SE boot disks did not work either. I went into bios and ran a system check and found these err...
Summary: Hi. I've been trying to get my CD-ROM to work but I get a "No drives found, aborting installation." error. My CONFIG.SYS has "DEVICEHIGH=C:\DOS\OAKC...
Summary: HELP! HELP! HELP! HELP! HELP! HELP! HELP! Here is the problem folks: I was trying to upgrade from 3.1 to Windows 95. There was not enough disk space a...
Summary: Thanks, i downloaded to floppy from disvr.cjb.net DOS 6.22. The second page displayed the following: CDROM Device Driver for IDE (four channels suppor...
Summary: I have a 24x IDE cd-rom I tested it in a 466mhz system and bios found it and windows98se installed drivers for it, when I tried to install it in a 486...
Summary: HELP! HELP! HELP! HELP! HELP! HELP! HELP! I am in need of some serious help here. I have been through every one of these messages at least twice! And ...
Summary: I was trying to install win98 on my really old computer (it has enough ram and space though). So I formatted win3.1 in order to install 98 (as its not...
Summary: HELP! HELP! HELP! HELP! HELP! HELP! HELP! Here is the problem like tons of others are having: I was trying to upgrade from 3.1 to Windows 95. There wa...
Summary: HELP! HELP! HELP! HELP! HELP! HELP! HELP! I am in need of some serious help here. I have been through every one of these messages at least twice! And ...
Summary: I made the boot disk and it booted win 95, now i get the following: Driver : v340 Device Name : Banana No drives found, abotrt installation Device Dri...
Summary: HELP! HELP! HELP! HELP! HELP! HELP! HELP! Here is the problem: I was trying to upgrade from 3.1 to Windows 95. There was not enough disk space availab...
Summary: Also, while I am here, I am also trying to get my cdrom working. I downloaded the cdindos.exe files and installed on my 486. Now at boot up when it is...
Summary: I have a friend with a computer problem. It's from the early nineties and his CD rom drive is Creative. The hard drive is 2GB. He doesnt have any USB ...
Summary: HELP! HELP! HELP! HELP! HELP! HELP! HELP! Here is the problem folks: I was trying to upgrade from 3.1 to Windows 95. There was not enough disk space a...
Summary: HELP! HELP! HELP! HELP! HELP! HELP! HELP! Here is the problem: I was trying to upgrade from 3.1 to Windows 95. There was not enough disk space availab...
Summary: Hello, I just recently semi-resurrected my family's old Gateway 2000 4DX2-66V that we got back in 1994. All it needed was a "new" power supply to get ...
Summary: Interesting...maybe I'm not in BIOS after all. All it says when I press escape key at bootup is 'T1850 Setup', with: Memory, (Total:4096, base: 640, ...
Summary: Doug and Emily, Thank you for the download. I did it and installed the TEAC program on my 3.1 computer. DOS recognizes it and runs the cd drive. ...
Summary: I have tried out what you suggested. It boots up from the disk however it says there has been no drivers found for the CD ROM drive and therefore abo...
Summary: I am trying to install windows 3.11 on an old 486 IBM i use win 98 boot disk to reformat and it seems to clear it ,, problem is i cant find a proper p...
Summary: I have installed a large hard disk in a 486/66 Packard Bell running win 3.11. The partions are labeled c: through f: When I execute my "cdremap.exe"...
Summary: I have a PentiumPro (Windows 98) with 2 SCSI drives totalling just under 4 Gigs. I'd like to add an IDE drive to this mix, but can't figure out how t...
Summary: Don, Thanks for the tip. I tried the driver and got "no cd found aborting installation" followed by "no valid driver" after the mscdex command line. ...
Summary: Don - Tried SYS C but got "bad command...". I took a look at the directory in C\:. Dos is listed there but not in brackets, i.e. not as a directory. I...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
