Summary: Hi guys. I have problems getting the cdrom to work in dos mode under Win95. The error mess I keep getting is "No drives found, aborting installation. ...
Summary: I ran FDISK on an old machine with w95 and now I want to install w98. After I boot up with the startup disk I get the message "no drives found, aborti...
Summary: I am stuck. I am a novice at this so please be understanding.... I have a Packard Bell legend 2051 computer that had Windows 3.11 and WFW installed. I...
Summary: I get the prompt "Start computer with CDrom support" it starts to load driver etc. but then sais "no device found, aborting installation" Any other s...
Summary: This is a new PC build, using all new components. I want to install 2 operating systems, WIN98 and 2000. I started with a WIN98 Start-up floppy di...
Summary: Hi I am running Windows 95 B on a Packard bell Pentium 200. I recently reformatted and reinstalled Windows 95. When I was told to restart I did so and...
Summary: On a working system I upgraded a 2gMaxtolHDD to a 20gMaxtolHDD. Using Maxtol s/w the partitioning and format went ok.Restarted with system diskette. T...
Summary: I have acquired an old (Win95 vintage) computer. The was nothing on the hard drive, but the Boot Disk I used worked, and the CDROM drive worked. I thi...
Summary: Using rescue disk to reinstall windows 98SE. Selected "Start computer with CD-rom support" Screen displays: "OTI-91X ATAPI CD-ROM device driver ...
Summary: My sister handed off to me her HP Pavilion 6740C after someone attempted to install wireless network in her computer. It was fine when delivered, and...
Summary: This to ammend an earlier unclear post.I am currently working on a system for a friend who thought his HDD crashed and instead his onboard ide control...
Summary: well i thought about it and my cd drive is plugged into my sound card, so i took out my sound card and connected the cd drive directly up to the mothe...
Summary: Well I have have formatted the hard drive, now Cd rom is not accessible, and when I boot with bootable disk, I am getting the error message for OAK d...
Summary: I am trying to reinstall Windows 98SE usind CD drive on a friends computer - in doing so I've used "Rescue Disks and Startup Disks without succsess. T...
Summary: My situation is actually a little different, I can have a floppy drive and CDROM in at the same time. autoexec.bat says: C:\MSCDEX.EXE /D:MSCD001 con...
Summary: Well, The first thing I did was use FDisk to delte ALL Primary Dos Partitions, And then I Re-Created it,restarted my computer, then Formatted the C: d...
Summary: When restarting the CD-ROM info says "no drives found, aborting installation" Which probably fits in with the fact that the E: drive is displaying the...
Summary: I tried the info I got with an earlier post about trying a WIN 95/98 bootdisk with cdrom support.They didn't work but at least it changed the screen I...
Summary: help me please all i want to do is reformatt my c drive i place the start up disk in and it will not reconize my cd rom at all when it flashe up it ...
Summary: im sorry i dont know much about computers but when i got this old laptop its a compaq armada 4131t win95 i started cleaning it out and i think i delet...
Summary: it's now saying This driver is provided by Oak Technology, INC.. OTI-91X ATAPI CD-ROM device driver, Rev D91XV352 (C) Copyright Oak Technology Inc. ...
Summary: I used a cdrom boot disk. It added some files like config.sys, cdrom.sys, etc. I added the mscdex.exe file. Now when I start up my computer it says: D...
Summary: I wiped my Hard Drive (which I have done on other computers many times) and tried to use the Win98SE recovery disk to reinstall Win98SE. When it gets ...
Summary: ok i went in STANDARD CMOS SETUP and selected primary master under hard disks as auto under. now when it goes to the a:\ prompt after it says no drive...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
