Summary: hi, i have a strange problem with booting up my pc in that sometimes when i try to access the bios all that appears is a dos cursor in the top left co...
Summary: Heya I've put together a new build and have been troubleshooting this problem for the past week. I'd be grateful for your comments as I'm losing the p...
Summary: I am building a new computer and have the current problem. When first building I realized I had bought the wrong ram. I checked compatability with t...
Summary: HI all, I just built a new box. Celeron 1.7, D845HV intel mobo. Windows 2000 loaded fine and all Microsoft updates. The system will run all night as l...
Summary: Make sure you have at least the minimum DirectX version required for your video drivers - look for installation notes that tell you what version that ...
Summary: I’ve been having boot problems for awhile. They will go away sometimes after a freash install of windows and a good cleaning of my case, but now ...
Summary: I am assembling a new computer for the first time in 4 years, and I've ran into a problem. I assembled all of the components (Intel Q6600 CPU, RAM, e...
Summary: I have a boot problem with a new build computer and it is driving me crazy. The machine will boot after several minutes of turning the power on and of...
Summary: Help needed with a new build. Corsair HX850 Gigabyte EX58-UD5 The machine would not boot up. When putting power on the machine you can hear a clicking...
Summary: I just received a new compaq dl320 server with no harddrive or cd-rom. I've attached a new harddrive that has not been used before and also a cd-rom....
Summary: New build. New everything. Never had this happen in any of my previous builds, which were all Intel (except for a long time ago, I used a Cyrix -- I...
Summary: I'm assuming you have everything connected correctly. "No Device Found: BIOS not loaded"." You probably have three sets of drive connectors and 3 driv...
Summary: Hey there, i was wondering of anyone could help with the (numerous) startup/booting problems that I've started getting from my pc since I moved. First...
Summary: I'm having the same boot problem actually, although you're seems a little deeper than mine. The whole, starting up and shutting off with devices conne...
Summary: well first first i built this system around a soyo barebone kit with the mother board already installed. it's about 3 months old and it began shuttin...
Summary: It has been a very good system for over more than 4 years.In august last year(2003)I had to replace the original HD (Maxtor 10 GB)and I installed a ne...
Summary: Just received a new build computer and when I power up the fan starts and the two CDROMs start flashing but nothing else....I have to power down and s...
Summary: Hello, After 3 problem-free years with my computer, I'm now having boot problems. I get 2 beeps at POST which supposedly means parity circuit failure....
Summary: I've just finished building my son a new PC. The problem is that it won't run Win 2K (tried NTFS and FAT32). The install runs fine but when you start ...
Summary: Hi there, Any help would be greatly appreciated. I have a Dell D600 Latitude Laptop Bios Rev A16 The Hard Drive died, bought a new one and fitted it....
Summary: Is this a new build of a computer system, or was it working fine previously? Do you have a generic system, or is it a brand name system? Your bios mus...
Summary: Hello, I am new to computer building and am having a problem with my first build. I have checked the threads and while I know there are many posts tha...
Summary: Thanks for replies so far every one. When pc boots up with recognised hard disk the drive is always identified correctly maxtor and a few numbers howe...
Summary: This is kind of a followup to the boot problem I had before, but I narrowed it down. The screen is blank when I boot sometimes, and after a while it m...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
