Summary: bought a D-Link 5 port hub last nght and i need to know how to network 2 computers with an internet connection using the network card in one computer,...
Summary: i have tried everything... both computers have win98.. working network-cards.. all the protocols,etc have been installed... i had the network working ...
Summary: I am having trouble networking 2 computers with crossover cable. When i view workgroup computers on the main computer it shows both computers. When I ...
Summary: Am trying to network 2 computers one with Win98 and the other WIN98 SE via ethernet NIC's and a crossover cable, have followed and tried all guides an...
Summary: I have 2 computers with Win98. Both have Network cards. I also have a 4 port hub. Both Net cards are hooked to the hub. In the Network Propert...
Summary: I have problems conecting in the same network computers with win98, 98se and milenium versus winxp because many times xp computer can't see computers ...
Summary: Hello all I have 2 computers with winXP. Both of them have NIC. I tried many times but I can not connect them through a crossover cable because there ...
Summary: I want to network 2 computers using different OS together. Co-worker uses Win 98 Sec Edition with Integrated Intel 10/100 ethernet controller. Her C...
Summary: The problem I am having is that I am trying to network 2 computers with a cross cable but on both of the computers it says that there is no cable conn...
Summary: on google, do a search on 'network two computers'. when I did this, one of the references you get is 'www.duxcw.com', go to the 'how-to' section and t...
Summary: Honestly pal. Your best bet even though there is a possibility of networking 2 pcs with just cross over cables, is two bye a router 2 straight Paired ...
Summary: hey i am trying to network 2 computers up and i need some help. i tried this once but i failed, this is what i did... i conected both pcs together usi...
Summary: I want to network 2 computers ( not in the same house) Can anyone tell me the best way to do this. I have a cable connection and the computer I want t...
Summary: On your new system running on Win XP, set the IP address in the same network with your 2 computers that running Win 98, and set your XP system using t...
Summary: Hi everyone, 1) I setup a network between WinXP and Win98. Both computer can see other computer's name. However, only winXP can get file from Win98 wh...
Summary: Ok, here it is, I am basicly clueless as far as networking goes, that said, here I go. I have 2 computers i want to network, the both have a 10Mbps 32...
Summary: I have 2 computers with network cards (both PII, Win98 etc)and a CABLE internet connection to one of them, with an external cable modem. How can I hoo...
Summary: I've got 2 computers: a laptop running win98 and a desktop running winMe. They both have ethernet cards and I recently bought a cat5 crossover cable....
Summary: Not impossible, just a little more complicated. You can't have 2 PCs with the same name on the same network but you can put them in different network...
Summary: I am going to be getting DSL within a week. The DSL modem i ordered is meant for 1 computer, a simple internal PCI modem with no ports on the back.(it...
Summary: armywebb3 asked just how to get out to the net and not about networking. To just get out to the net you don't have to worry about what workgroup the ...
Summary: ICS is a little slower accessing the Internet than using a router and you have to set up and configure a good firewall on the host PC, but it should w...
Summary: Hi, already tried to find answers here but just cant figure out whats wrong. I try to describe my problem in as much detail as i can. Basic Setup: I h...
Summary: i have 2 computers with windows xp pro. one is compaq presario other is dell. i connected a cat5 cable to each network connection directly. will it wo...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
