Summary: Yes, the firewall is turned off. In fact the NIC doesn't have a power setting to it shut down. It connects into a network router just fine. That is it...
Summary: we have a pc on our network that can access the network but not email or internet. here's the problem: person can not log onto groupwise, she can open...
Summary: Help Please, My home network suddenly stopped working - - - i.e. can't connect to workgroup computers or print share. I have one PC directly connect...
Summary: Hi, I tried experimenting today and ofcourse got in a jam. I have DSL and CAT5. My computers all access the internet perfectly in different rooms and...
Summary: Hi I have an exchange server thats not sending e-mail to an address. It can send to any address except this domain, but they can send to me and i can ...
Summary: my friend is currently signed up with BT. There are 3 computers in his house and they all get their connection from the one router. Last week, his int...
Summary: Hi I set up a VPN using the Symantec Firewall/VPN Appliance, Model 200R. I was able to make an initial connection to the network through the VPN clien...
Summary: Hi guys, I tried to create a home network using ethernet cables, hub & nics and have gotten local area connection status:connected in my taskbar on bo...
Summary: Here's the deal I'm running a home network with 4 Pc's 3 of them have 98 1 has 2k. On the laptop with Win2k I have a Wireless and build in LAN. When...
Summary: I have 2 PCs both running XP sharing an Internet connection using a Linksys WRK54g wireless router. One PC is connected directly to the router, the o...
Summary: I am running Exchange 2000 What do I need to do to stop people from the internet using my server for relaying? I have tried to configure route restric...
Summary: Sorry, it came from my personal computing.net posts, here is the post: Subject: High speed internet configuration Original Message Name: Xena Date: A...
Summary: I've installed 3 of Gigabit Ethernet Card SMC9462SX in 3 Linux Machines. These are all Redhat Linux Version 8 machines, and I've used the driver for K...
Summary: always start with hardware. Are you using a hub? If not that can be a problem. make sure that both of your "local" ip addrreses are in the same networ...
Summary: I am on a LAN network. We could not send messages using net send on command prompt to one another.. it says cannot find the alias on the network.. how...
Summary: I have a problem with my wireless network, everytime i plug in my club i-mate jasjam phone and sync it with my laptop using activesync it disconnects ...
Summary: I have networked two XP cpmputers together with a cross over cable. The host computer is sending and recieving data, but the client is not recieving a...
Summary: My laptop (Dell inspiron 8600) gets disconnected from the wireless netowork. I have a home network with two wired PC:s and one wirelss laptop. It seem...
Summary: Hello - we're running a Windows 2K server, several XP terminals, a 24-port Netgear hub and an old Alcatel Speedtouch 510 router. Something has gone wr...
Summary: Hi, I apologize for the length of this post but I needed to give every detail I could think of since I can't sum it up in a technically efficient mann...
Summary: Win+L disconnects the user, not the system. When you reconnect your user account is then connected to the network. It is the same when you boot up. ...
Summary: I set up a small network at work, one server (W2K) with XP/2000 client machines all connected via 2 hubs, with a cable modem connected to a client, us...
Summary: I have a Winnt computer running off a domain. I also access a home network which runs off a workgroup. I can normally access both simultaneously, ...
Summary: My computer and my sisters computer both connect to the wireless access point, which is connected to the router, which connects to the cable modem. T...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
