Summary: hey guys i was installing new hd in my pc (WD360) raptor 36gb ! here wat i did ! i put both power connecter in there the SATA power & molex ( legacy p...
Summary: Wonder if any experts can help me out with this, i am running on a XP1700+ with 2 PC2100 256DDR = 512 DDR.. Using a K7N2-L series nforce2 mobo. How ca...
Summary: need help for award ca64-ec i put a celeron 433mhz and nothing showed up on the monitor do i need to set the dipswitch if i do what is the set for a c...
Summary: I need help on overclocking my 2.5 barton I have a K7N2 mobo with pc2700 ddr i set my mobo from 166(default) to 200 mhz its running as a 3.2 (2,226 mh...
Summary: I need help overclocking my computer. My mobo is asus cusi-fx (http://www.asus.com.tw/mb/socket370/cusi-fx/overview.htm) and i have cleron 850 process...
Summary: Hello, I need help totally, i have a 1700+ palomino and i dont want to unlock it but i want it to go at least to a 1900+ I have my multiplier set at 1...
Summary: thank you frantz somone finaly gets me on why i whant to builld a computer but now i realize that it is very hard and you will need extream dextarit t...
Summary: Hi, I have a 1.4 Amd T-bird - shuttle AK11 board - with 512 Ram and vga Sis 315 4x AGP. Everything was running smoothly until last week, I couldn't ru...
Summary: hi, i need help in ocing my rig. im new with this so i really need info about this. anyway, i have an msi 746fx board and axp2000, how can i oc it and...
Summary: your psu may or may not be enough to get the cpu running at 1.67g, but that cannot be the reason you are at 1.25g. My guess is that the 133 number y...
Summary: I need help setting up the bios of this motherboard to recognize the processor as a 2600+. The max it goes is a 2000+ I don't need to overclock it. Ca...
Summary: Hi, my name is Angel I am new to this website, I decided to join when I saw that there were alot of experienced people that helped out. I am looking t...
Summary: Can't really fry your chip. The worst that can happen is your system doesn't POST, in which case you clear the CMOS using the appropriate jumper (or ...
Summary: I have a Pentium 4 1.8Ghz with 768 DDR memory and BioStar M7SXG Motherboard and a CooLEasY fan for 2.3+(witch is the s---!)and i need help overclocki...
Summary: I am gonna switch to intel shortly and need some help.I've got everything I need except for cpu,gpu,ram,mobo,psu. I'm selling my 64x2 5000+ mobo,ram,p...
Summary: I need help to over clock new to this here is what i have ABIT Fatal1ty FP-IN9 SLI MOTHERBOARD 3.2ghz pent d 940 4gigs ddr2-6400 5-5-5-12 patriot ram...
Summary: hi I need help overclocking my new computer I personality built. Do I need to overclock it or is it best to leave it. Cooling is not a problem. Thanks...
Summary: I've been to the site, but they only show diagrams as HOW to set the speed. What I like to know is what speed I need to use. Now I know 33MHz for PCI ...
Summary: i need the jumper setting for a 5vgm m101 motherboard with a 233 intel 233/mmx.i found where it will support a 233 but all i coud douwnload is quick r...
Summary: Guys I need your help on fixing something. I have successfully installed nForce driver and the nForce audio control panel on my Biostar M7NCD mobo. Bu...
Summary: The Asus P5B Deluxe/WiFi and an E6300/E6400 is a good combo, but if you do not really need an inbuilt WiFi, firewire or RAID support and content with ...
Summary: Your Athlon XP CPU runs at 266FSB (2 X 133) and your memory at 333 (2 X 166) I would then suggest that you setup your system with those settings if yo...
Summary: Oh great, some slimeball uses this forum to hawk his low-quality, high-priced computer "support". Thanks anyway, Alex, but you provided NO HELP and no...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
