Summary: We currently have an NT4.0 server (SP5) with internal and external network interfaces and all is fine. All I would like to do is add another IP addres...
Summary: Hi.If memory serves me correctly i believe you can assign a maximum of 4 IP addresses to one NIC on a server running NT Server 4.Is that right?If so,c...
Summary: I have a win 2003 server which i have given a fixed IP address and reserved it on the SBS 4.5 server in our office. When I log on, the server 2003 kn...
Summary: How can I add multiple IP addresses into the My Neighborhood-> properties-> TCP/IP protocol-> IP Address by using a script or program instead of addi...
Summary: Well.... When I go in the networking properties, protocol tab and in TCP/IP, I can change the IP address and exit without rebooting. Why I want to do ...
Summary: Hello can any one tell me of a good website on installing a RAS server.. but before that.. let me tell you my situation because i have a lot of instr...
Summary: I have a network where a win2k machine is the dhcp server and shares files and internet access through a hub to the other computers. The other compute...
Summary: I have a few questions about NT Server 4 I hope you can answer tem for me!! Where can I set the BDC to handle most of the logon requests? Where can I ...
Summary: I have a better idea for what you are doing. Go to ftp.tamos.com/esstls2.zip and download the evaluation copy of Essential NetTools. With this tool ...
Summary: IP address are found differently on the two OS. Win 9x: From the START > RUN prompt, or a command prompt, run the program WINIPCFG. A little program ...
Summary: David, if it has a NETBios name you can tracert to the IP address and the name will show up if the computer is on line. If that still doesn't tell you...
Summary: I think you have DHCP set for your server. Go into networking->Ip address and set your ip address. go to your external dns box, and set reservation f...
Summary: I was wondering if anyone could point me to a resource for setting up multiple IPS on one NIC in Windows NT Server. We want to use multiple IPs unde...
Summary: Are these NT or WIN98 clients? Since you only have 100 users, can we assume only one subnet? If there are multiple subnets, do the dial-up users get ...
Summary: It's perfectly fine with NT, you can even set one to dhcp and the other not and assign multiple IP-adds. if you want to. To enable routing (sending ip...
Summary: A easy way out?! ;) http://www.dlink.com/products/adapters/dfe570tx/ This NIC is like 4 in 1. The included drivers/software is the thing that does the...
Summary: I got it working this morning, with a little bit of swearing ! Here's how I did it: Take a note of the network configuration in NT (Control Panel ->...
Summary: I have two NIC's in one server..this is my subnet and IP addressing scheme...... 255.255.192.0......subnet mask 133.133.64.1.......first nic 133.133.1...
Summary: we have winnt domain system with 2 nic cards.The ip address are 192.X.2.X and 192.X 1.X,the 1.X is another domain. i can transfer files from domain to...
Summary: i have 1 network card in my system. i configured 2 ip address(one is xxx.xxx.4.13 and xxx.xxx.1.88,i am unable to access the 1.2 server why? Please he...
Summary: You shouldn't need different NICS, NICS are given different MAC address at the factory. NEED more info. is this a desktop or a laptop. Had similiar pr...
Summary: I have two NIC's in one PC, they work find. Plus its a NT Box(4.0 and SP6A). I think I have a routing issue. What works: So I have NIC#1 and NIC#2 (bo...
Summary: If you intend to use this as a router, you need TCP/IP protocol (I assume this is installed). Also install RIP for IP and then enable IP forwarding f...
Summary: Technically you could do it your way ,you can plug the DSL modem direcly into the hub ,but the problem is that each computer plugged into the hub req...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
