Summary: i wanted to know how to put scsi jumpers for four hard drives. Im using this small server computer I build with new four 9gb hard drives model: DNES-3...
Summary: just bought a new hdd and the jumper settings for master\slave\cs are a bit different to what i have been used to ie the 1st one says DS (master) sec...
Summary: Every time I try to select using my hard drive on its own as the master it will boot up and then go to a blank screen with a blinking cursor and do no...
Summary: I just bought a WD 160 GB HD and have it with no jumper settings running by itself. I want to put a old Deskstar HD which died and i want to see if i ...
Summary: What is the jumper settings to set a hdd as slave? Have a diagram perhaps? I looked on the hdd itself; makes no sense to me. It isn't the size of the ...
Summary: hi, i was wondering where i could find jumper settings for different cpus?. I am planning on upgrading my computer to a Pentium III 700 or approx. spe...
Summary: I have a Pentium 4 1.5 ghz and I am trying to figure out the proper jumper settings for the CPU clock. My only jumper settings available are 100M and...
Summary: Help! I need a manual for my mobo. The one supplied didn't detail jumper settings. The website for Pc Chips is crap. Any ideas where else plz, all he...
Summary: I have a Asus P4P800VM board. My manual only shows jumper settings for "clear rtc ram" and "usb device wake up". On the board I see other jumpers but ...
Summary: Since the DVD burner can also burn CDs, the CD burner really isn't needed. This is how I would configure the 4 devices: primary master = 120gb HDD pr...
Summary: Hello All... I am looking for some documentation for the jumper setting on the audigy platinum drive (Live-Drive). The manual only has the jumper set...
Summary: I am trying to put this computer back together after taking it apart awhile ago, but I don't remember the jumper settings for the board. If anyone has...
Summary: Hi all, I´m looking for TXPro 512Kb motherboard manual or jumper settings. I need to install in this motherboard an AMD k62 processor. At this moment ...
Summary: I have a 300mhz PII with my system bus running at 66mhz. My ram is capable of running at 100mhz. Would thare be any problems if I set the jumper setti...
Summary: Hi Shelby, I have been trying to set the CPU clock to 133Mhz. The User Guide is not very clear on the jumper settings. Also my CPU is P4 2.4Ghz but sh...
Summary: I have an "antique" I am trying to fix up for someone. The machine is a P133 with 2 hard drives. 1 change I made was to make the larger of the 2 dri...
Summary: I just bought a new hard drive and I want to make my old WD drive a slave. Does anyone have the documentation on a WD Protege WD 400 40 gig drive mod...
Summary: I've just bought an NEC ND 3520A dvd-rw drive. When the drive arrived it had no information with it whatsoever, and no information about how to change...
Summary: I have an old motherboard "486 Socket 3" with a Am486 DX2-66 processor. I have 2 other processors, Am486 DX4-100 and one marked on bottom digital Mod...
Summary: What should the jumper settings be on the hdd when you have a cdrom drive on the same ide cable? should it be master, slave present? thanks, simon ...
Summary: Does any one know the jumper settings for a quantum fireball ex hdd..I am trying to make it a slave but I can't get it reconised in the BIOS.... ...
Summary: hi.. need help with maxtor jumper settings, i saw this information somewhere a some time ago, but cant find it anymore... i need to kno, how to put ma...
Summary: MSI Raid board.Was running but replaced hard drives. Have 2 CD drives and 3 hard drives and replaced all but did not make a note of the jumper setting...
Summary: Hi all, could anyone help me with the following? I am making adjustments to an old computer. The motherboard is a GMB-P56SPC (Gemlight) and the proces...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
