Summary: Here's the story: After I installed my Lexmark X85 multifunction device, I tried to dial up my usual ISP with DUN and got a 633 error - com port in us...
Summary: I just got a new Sony Vaio, had no problems until i connected to the internet. It disconnects after awhile and I have to restart the computer or AO...
Summary: I have a Diamond SupraMax 56i PCI modem and would like to reassign the COM Port that is assigned by WinXP. I need to assign it to either COM1 or COM2 ...
Summary: I have a problem with a US Robotics 56k external modem. If the modem is not switched on before startup it isnt recognised as being present on the com...
Summary: I am intrigued as to what you are using that requires 7 Comm ports. I take it you are using an internal modem. It is normal for them to use Comm 3 ...
Summary: Hi people, I've updated my OS from win ME to XP. Now i can't configure my standard PCI 56k modem with the COM port. It didn't give a response. Can y...
Summary: Hello guys, I just want to know if there is some way to clear com ports. Im after installing a modem on my PC but it is using COM 6 any it says COM 2,...
Summary: Hi, We have a banking application that relies on a dial-up connection to create a secure link back to the bank. For whatever reason this application (...
Summary: I am trying to connect my Philips mobile phone to the pc via an irda port. The program also needs to install a modem but I have no com ports listed in...
Summary: Try finding out which Hardware is running on each COM port (I.E. Your modem) and then check for all programs that use that hardware (I.E. a fax progra...
Summary: Hi, Ok i got a problem thats driving me nuts, If I try to conect a external modem to my com port or set up a com cable between my two computers, using...
Summary: In device manager the only port that shows under Ports is LPT1. My modem doesn't work -- no dial tone -- on this brand new computer. It says it's wo...
Summary: I have overlayed XP over win ME. But some how I can not install my modem as COM 3 is missing. I have tried to install another COM port and I assign it...
Summary: I was originally running Millenium and my fax worked fine. I upgraded to RC1 now it says my modem is on COM Port 3 instead of 2 where it should be. Ho...
Summary: I've been getting an error message that my modem is already in use. How to I find out if my COM port (COM3 where my modem is installed) is in use by ...
Summary: I connect my GPS to the only com port and when I run the program it tells me it's busy. There is a com 3 but it is the modem, I disabled it and it sti...
Summary: Iīve installed XP pro but I canīt get a modem to connect. I have tried my internal isamodem and a external 33.6. Both get the message that there might...
Summary: Hi, Thanks for all the suggestions. Since i don't use my modem anyway, i removed it and then in device manager removed all the com ports, then i reboo...
Summary: My COM port isnt listed under device manager and i believe it is the cause of my problem not being able to sign back on once i get disconnected. If i ...
Summary: I'm dealing with a Toshiba Satellite 1105 with a factory installation of XP Home on the first partition. Its internal modem is a Toshiba Software Mo...
Summary: You might need to update your modem drivers. I had the same problem. Xp wouldn't detect my modem and you can't pick a com port. When i pick com port 2...
Summary: hi, i updated to xp from 98 and when i went to install my modem the com ports did not work, i rreinstalled them but they still did not work, in the de...
Summary: I am wondering if anyone knows of a program that allows for USB Ports to be routed to Virtual Com Ports. Let me give you some background as to why... ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
