Summary: sir, i have 2*80 GB hard drives IDE. after fixing the version 3.12 with the new patches in order to allocate 1GB ram and accessing huge capacity of HD...
Summary: Have a question or two about how to load patches on to a nw3.12 server from a floppy disk. I typed load a:\ and it said it was loading and then said ...
Summary: I just upgraded our NW3.12 server from a P3-500 w/128 MB to a P4-2.8 w/512 ECC. The old hard drives were 9 gig and the new hard drives are 80 gigs. Th...
Summary: hello, I have a network with win95, win98 and Winnt workstation and I have a server with Novell 3.12. All the computer are in the network perfectly bu...
Summary: I have a Server with Novell 4.12 and 7 Client with Win 98 and millenium how I can Share Files and Folders between Computers Client without server cont...
Summary: Running WIN-XP-PRO client 4.83 and need to access Novel3.12 server BTRIEVE based application. When I open the DOS window & move to the Novel drive (lo...
Summary: Hi all i am having a novell netware with 3.12 loaded.previously all was fine. rececntly i loaded long name space support on my nwn server.after that i...
Summary: Firstly, I'd like to thank everyone at computing.net for all the help. I find this site to be one of the most helpful when doing computer work -- and ...
Summary: It sounds as though you might be running into DMA vs. PIO problems. If your IDE driver is running PIO (the only mode for the driver included with Net...
Summary: Please advise how to identify the root cause for high utilization found at Novell 3.12 server. The maximum packet receive buffers has already set at ...
Summary: Hello, I hope someone could help. My NetWare3.12 is connected with two NICīs to the LAN. One 10Mbit the other to 100Mbit. I have bound ip to the NIC e...
Summary: I need help!! I have a server with Novell 3.12 and a partition of 19 Gb, it installed and funtionating OK. The problems is that the terminals when log...
Summary: sir, please advise. i have NetWare 3.12 and i have a new motherboard intel chipset 865 with SATA built-in controller. what loadable module i have to l...
Summary: Harisandy - you will need to add the second nic by setting up the autoexec.ncf file with the information in the similar manner as the very first nic c...
Summary: Have Netware 3.12 with two hot-pluggable SCSI Ultra-wide hdd 9.1-GB. Four volumes, Sys, Vol1-3 are all expanded to the second 9.1-GB. I just bought an...
Summary: I have a network of mostly Win98 on a NT4 server and a Novell 3.12 print sever. I recently bought a new comp on a win2k pro OS. I have a inventory c...
Summary: Does anyone know where to get a NW3.12 compatible ide driver that supports UDMA mode 5 hard drives? I installed the most recent 3.12 driver from Nove...
Summary: OK Ayad, What you get is volume SYS cannot be mounted because it is corrupted. That's mean that the SYS volume need to be repaired with the vrepair co...
Summary: Need to know how to set up a printer/copier with on network card to work in netware 3.12 the user machines are running a DOS program that needs to pri...
Summary: NetWare 3.12 does have some issues with IDE technology, and this could be one of them. I was told to use SCSI with older NetWare versions. ...
Summary: Thanks for the reply, I am installing a new 16 port switch and all new Cat5e cable, All the workstations have coax cable, There are no hubs or switc...
Summary: I seem to remember that nw3.12 requires that you boot the server from a floppy as it doesnt create a dos partition like nw4 and above. It is asking y...
Summary: I am getting ready to purchase a new server for the company that I work for. It will come pre-installed with Novell Netware 5.1 Small Business Suite....
Summary: The more memory, (usually) the beter. However, with NW3.12 32 (or even 24) Meg of RAM will be OK. The advantage of more RAM is the server can cache ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
