Summary: How do I find all the network information in the command prompt? I remember there is a command where it lets you view all the network infromation for ...
Summary: My problem begins when I install the Novell client 4.83 SP1 under my Windows XP, the microsoft network slows down and take several seconds (20 or 30) ...
Summary: I have a frequent message that appear like a question window and it ask questions like viagra? poker? fioricet?, ect. I cant do anything else than pre...
Summary: you installed a cable modem and a linksys router at the same time? what were you using before as your hub/switch? does your linksys have NAT turned on...
Summary: Here's how to identify and overcome the most common of those networking woes in a multi system network. FILE AND PRINTER SHARING FOR MICROSOFT NETWORK...
Summary: Here's how to identify and overcome the most common of those networking woes. FILE AND PRINTER SHARING FOR MICROSOFT NETWORKS NOT PRESENT IN WINDOWS 9...
Summary: Here's how to identify and overcome the most common of those networking woes. FILE AND PRINTER SHARING FOR MICROSOFT NETWORKS NOT PRESENT IN WINDOWS 9...
Summary: I am running a SAMBA server on an office network and am having a couple of problems with the Windows XP clients (clients with the other versions of Wi...
Summary: The setup: peer to peer network (rj45 crossover cable) connected between two machines running xp professional (no hub). Firewall has been disabled. T...
Summary: I have a similar problem: two networked Win98 SE machines with Netbeui already installed and a new Win XP Pro machine. I don't even see how to add t...
Summary: you'll need ot logon to the 98 machine using an account that exists on the XP (both username and password!!). You may also need to use "Client for Mi...
Summary: what are you talking about?? Home has P to P and you can connect to a domain...I'm doing it now! Make sure you have client for microsoft network inst...
Summary: I'm confused. Can you or can't you see your mom's computer? Anyways, here's what you need to do. You can set up both machines to use TCP/IP instead of...
Summary: Thank you Michael!!! (and everyone for taking the time). Increasing the IRPStackSize from 11 to 14 (decimal) did the trick. The article that explains...
Summary: You should install client for microsoft networks and the TCP IP and IPX protocol. Specify the network address for each computer (i.e computer one 192....
Summary: I have 3 computers on my home LAN, 2 connected to a switch and 1 laptop on a Linksys wireless access point. The two switched computers (XP and 2000) ...
Summary: Go to control panel, network connections, properties. Uninstall the file and printer sharing for Microsoft networks (service). Restart the computer an...
Summary: Hope this information helps you - To turn off the password protection: Open the Network Control Panel. Make sure the Windows logon is selected, not ...
Summary: Cleaning Out AOL From Your Computer http://www.aoleave.com/aoleave2.html http://www.webzila.com/articles/aol/aol.html Demystifying the Windows Regist...
Summary: First off, what are the IP adresses of the two units?? Are they set up for the same Subnet? Next be sure that File and Print sharing is on, and to be ...
Summary: remove the computer that cant see the other from the workgroup by putting it into a different one. now reboot when prompted and then rejoin the machin...
Summary: I have a couple of Win XP home machines sharing an internet connection and ideally sharing files and a printer. THey share the internet fine and occa...
Summary: I have a Linksys Cable/DSL router, and I think I might know what your problem is. If you can both access the Internet, you must have all physical conn...
Summary: Networking Win98SE to WinXP Problem How to setup a way connection, So MY WinXp can see Win98SE too !!! Network Setup: -Connect Only 2 Computers -OS: W...
Summary: Sorry, Mistake.. Clone Mac address. In your Admin control panel of your router. there should be a spot to clone a MAC adddress of the computer that is...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
