Summary: What is the maximum amount of memory Netware 4.11 with Support Pack 9 on it can support. I just upgraded our Compaq server (the board can support up t...
Summary: How to Install and Configure NETWARE CONNECT (Last modified: 14JUL1999) This document (10011354) is provided subject to the disclaimer at the end of...
Summary: Is there a maximum hard drive size a disk can be under NW 4.2? I've installed a 100GB drive into a file server and after trying to merge the volumes ...
Summary: We are using novell 4.2. Both the server and workstations having PCI cards(10/100 mbps). In this situation when i remote boot any station , the total ...
Summary: The more memory, (usually) the beter. However, with NW3.12 32 (or even 24) Meg of RAM will be OK. The advantage of more RAM is the server can cache ...
Summary: HI guys. I have NovellNetware 4.11 and i get a messahes in my console. the messages said "Cache memory allocator out of available momory" and then app...
Summary: I have a Novell 5.1 server which refuses to see more than 65MB of memory while in DOS mode. The DOS version in current use is 7 (whatever win98 uses)....
Summary: I'm trying to install netware 4.02 on a machine. While going through the initial setup i get a error that says "Inufficient memory to run Netware 386...
Summary: This is a DOS app. W/stations are diskless( i.e. booted by dos disk). Connects to Novell server to process invoices. Only one w/station expiences "in...
Summary: how can i calculate and add 256 ram to my server under 3.12 i know register memory 1000000 8000000 but it gives only total memry of 135 mega ...
Summary: hello Novel fans, I have a server and i'am using Novel Netware 3.12 I was able to boot the server ok but now a message comes up saying program to b...
Summary: Recently my server begin whit the next message: "Not enough memory to validate directory" and then "1.1.39 Cache memory allocator out of available mem...
Summary: I have a Novell 4.11 server that 256mb of ram in the machine, but Novell is only reconizing 64mb of ram. Can someone please tell me the command to mak...
Summary: Hi, Can someone give me a quick run down on monitoring memory in novell. Specifically though, how can I tell if my server has resources available for...
Summary: Hi, on the console prompt of my server, when i send memory, it announce me 523838 kilooctets for a ram of 512 Mo. do i need to add anything else to ma...
Summary: I have a Acer Altos / Piii / 256 MB server loaded with Novell netware 4.2 Two Hotswap ultra -160 hard disks are mirrored, havind 5 extra volumes than ...
Summary: I set up a 4.2 server using msdos 6.2. Himem started in the config.sys and the device drivers for the controller and disk are in the autoexec file. ...
Summary: 1. Try to run FDISK /MBA. 2. Try to re-partition your HD. 3. Create at least one (1) percent of DOS partition. 4. Try to re-install NetWare 3.12 5. Ma...
Summary: Hi, I have to do a 350 word report and a power point on Novell's Memory Manager and I have not been successful in my research at all... Does anyone kn...
Summary: I am trying to add more memory to get my Novell Server up to 512MB. (Presently have 256MB) When I add the memory I get this error on the boot up befor...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
