Summary: Hi! I have a cable connection coming into a cable modem. The signal then goes to a NetGear RP614 which shares a wired ethernet connection to 2 desktop...
Summary: Me and my brother both share a wireless network on our laptops from a Linksys Wireless router. When we go to play eachother on partypoker.com it doesn...
Summary: Hello, I have a problem....I cannot obtain IP address in XP...I can see the local network but just can't get an ip adress when I click on renew or rep...
Summary: Hello i am try enter kick out or banned java chat and do you have any suggest how i can use some one ip address such remote other computer or change i...
Summary: I can not renew or release IP address. Tryed 2 PCI network cards and 1 ISA, cables changed 3x. All of the hardware is working fine on other computers ...
Summary: Hello folks, I have an Edimax 6104WG router, it's been working without problems (with a Belkin USB B rated adapter and with a Peak Hardware G rated U...
Summary: Its possible the router isn't providing network addresses for your Pc's, have a look in the manual and see if it mentions DHCP(auto addresses) or stat...
Summary: Actually, you can do packet filtering via a bridge on some firewalls and switches, but this isn't generally recommended and can't usually be done with...
Summary: Thank you for your indepth reply paulsep, I have managed to get a better idea on what sort of ip addresses i should be assinging. If I am correct, I ...
Summary: Hi there, I'm having this problem: I have a small network in my office and I'm running 10 identicall PCs (like this one listed above) and I have this ...
Summary: It sounds like the DHCP service in your router has stopped. This is what assigns the IP addresses to your networked computers. Usually resetting the r...
Summary: Hi, mryeti. A couple things: -If you are manually assigning static IP addresses, you don't need to use DHCP. You especially don't need to configure ...
Summary: When you're in the Network and Dial-up Connections window, right-click on the network connection you will be using and left-click on Properties. Click...
Summary: 0.0.0.0 doesn't mean you can't renew, it means you don't have an IP at all. If you are connecting directly between 2 computers then a crossover is th...
Summary: I think the solution is a little more complex. If you want all PCs to keep their existing IP assignments, but still have PCs on network-2 connect to ...
Summary: A 169.254.y.z IP address is an automatic private IP address that the computer has assigned itself because it cannot get one from the DHCP server. If ...
Summary: If a machine assigns its own IP address, then when connected directly to a Cable modem, that assigned IP address must be the same as the (or one of th...
Summary: Hi, I have been trying to setup peer-to-peer network between dos box and win2K pc. I have got the dos box to work fine, ie i can ping its own card and...
Summary: You need to clarify if the router needs a static ip address or the server/pc the vendors software is on requires a static ip address. Very different s...
Summary: This is quite ignorant but I have no idea how to set up a LAN other than physically connecting computers via hubs or switches. More specifically I am ...
Summary: Please help, my desktop can not access the internet. I have a new wireless router in one room in the house and access it with my laptop, no problems t...
Summary: You also need to know the priveleged or enable password. You don't actually set an IP address for the device, but rather an interface on the device.Th...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
