Summary: Hello, Been there and anywhere else but can't find anything on this pc. need to find motherboard manuals spec's anything :) any thoughts would be ac...
Summary: it has two chipsets on it, one has sis 85C497 and other SiS 85C496 it has 3 PCI and 4 ISA slots. Socket 3. btw it had amd 486 dx 66mhz cpu on it, but ...
Summary: Hi all Just bought a volacano 9, I plugged it into the mobo using the 3 pin connector, but it also cam with a connector to plug it into the PSU, shoul...
Summary: I looked at my settings through my manual and they seem good. Jam,my auto restart box WAS checked marked,so i unchecked it,but my clock keeps changing...
Summary: Diagnostic Software, Links for Quick Reference Go here http://www.suggestafix.com/index.php?act=ST&f=21&t=9229&s=330bd883a153eebfc442bc1c0877e634 List...
Summary: How old is the comp ??? What brand mother board do you have ?? Did you check out the flash procedure on the mother board web site ?? Did you down load...
Summary: Hi there, I bought two brand new Geforce 7n400 pro2 motherboards however after installing all the components (CPU,RAM,HDD,AGP card) there is nothing o...
Summary: I have looked in my manual but didn't help much, as I have lot's of file on my main drive C:, and rubbish on my other drive which is D: I want to run ...
Summary: **Be warned! I know next to nothing about computers** Hey mattwizz3 and jam, lighten up a bit, this person is trying in desperation to get the PC work...
Summary: I have a Dell Dimension 4400 and I need to find out what motherboard it has. The reason why I want to know is because I want to upgrade the CPU and Me...
Summary: Spinal, I had the same issue on my Geforce 3 Ti500, even though it had a DVI and an analog output this does not mean it can run two monitors to make t...
Summary: >>hi i have just updated my computer , i bought a new ATX power supply , 478pin pentium 4 mainboard , pentium 4 2.2ghz cpu and heatsink/fan , 256mb DD...
Summary: Mostly it has to do with the refresh rate, But yes a lot of old monitors wont go 800x600 or better, usually manually lowering the refresh helps but a ...
Summary: To start with, you have told us absolutely nothing about your system. Listing your system specs would be helpful. "I ran Memtest for about 20 minutes ...
Summary: After installing the MICROTEK Scanner Software into a new Computer everything seems OK except there is no Icon on the Desktop from where I used to acc...
Summary: Check your manual/specs... Some boards, even though they have three RAM slots & advertise support for DDR400, will only support one stick of PC3200 (D...
Summary: Where does the message:- FAILED TO CONNECT appear? At the sender's machine? If so, it suggests one of your settings has been changed, e.g. from auto ...
Summary: Thanks for getting back to us and supplying the bios string. So it IS an AL440LX with an OEM front panel header. "...power led and hdd led don't seem ...
Summary: I have just bought an Nvidia Xtasy GeForce4 TI 4200se 128MB DDR. What is the highest resolution that it will run at with the same speed and smoothne...
Summary: I just rented a PC tutorial CD from the library. Basically its a follow along type teaching aide. The stragest thing, on one PCI have 2) I get audio w...
Summary: A few things it could be that will cause the probs you describe: >bad memory: swap with a stick you know is good. This is probable #1. >corrupted BIOS...
Summary: Sounds like a Compaq Portable I or II. Green monochrome screen? The Portable III was more like a sewing machine with an orange display. Just search ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
