Summary: hallo, i have some problem in netware configuration. my netware run at server with specification like this : processor Intel Xeon 2GB, Ram 3GB, HD SCS...
Summary: With NetWare 5.1, it is true that the NetWare kernel doesn't make complete use of multiple processors, but NetWare 6.0 and later do. If you load ACPI...
Summary: For config mirroring add new hdd and load disk driver in novell create same partiotion which you have in your primary disk (make sure use same type an...
Summary: Hi, VLANs are supported by the NIC driver, not by NetWare. Some ( smart ) driver developers allow the server to be connected by a single tagged trunk...
Summary: I have a few questions for you: what version Novell? if 5x are you using NDPS? are u using JetDirects? hp only supports NDPS 5x they may work and the...
Summary: Hey all, ever since moving to a Netware 6 server, alot of our client stations are unable to connect using IPX. They seem to use IP most of the time. T...
Summary: I've made a mistake, which I hope can be corrected without having to re-install the NetWare 5 Server software. When I created the 50mb Caldera DOS par...
Summary: Hi, We have an educational application that we produce that can be run locally on a users machine or can be shared among users when installed on a net...
Summary: I have a P1 100mhz 36mb RAM PC boot up by DOS6.2 running as a Netware 3.12 server connected with 5 workstations running netware client from Win95. Rec...
Summary: I don't think it is a configuration with the switch. If vlans were setup and access was restricted on your port reboots wouldn't magically make those ...
Summary: The Netware server will support any NIC that it has drivers for. I'm betting that neither of the items you mention come with Netware server support.....
Summary: Volume Size depends on the file system you use. In Netware 4.10 you use NWFS (the Netware traditional file system). So the volume size limit is 1 TB. ...
Summary: i have tried to map a directory with net use, it work on my winXP, but failure on client workstation Win98. C:\>net use j: \\nt\e\sys\fox2 /yes Error ...
Summary: A strategy for Word, is to modify normal.dot and ensure the user loads this. If you make a macro with the same name as one of the built in functions s...
Summary: > Does anyone know why the faster machine is > running slower than the original machine > and why the utilization is so high when > copying files? Old...
Summary: what R all of U talkin about? i think this is a good site. i love microsoft stuff because i do not have to tink about how 2 use dem. some peoples tink...
Summary: NetWare Volumes need not be contiguous. You could, for example, create a NetWare partition and then make 25% of that SYS and 50% VOL1 - that would le...
Summary: Here's a away to get admin rights with no hacking or cracking. Go down to the admin office and tell the admin u need ur password changed cause u forgo...
Summary: We're running IntraNetware 4.11. A new office has been added to our MAN with static routing on the router connecting the office to the MAN. Users are ...
Summary: Hi ! I have secondary server running netware 5.0 when is server booted it makes intermitted beeps and then after about half hour makes conituous beep...
Summary: I suspect you have another device acting as a IPX router on your network. If you are not using IPX routing on your Novell Servers than make sure it i...
Summary: in windows XP, u can click on start, then pointing anywhere in an empty space, just right click, u should see only properties. click on it. Then u wi...
Summary: Not knowing what type of GroupWise client is being used. It is harder to give one definitve answer. But with the error you say it gives when he clicks...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
