Summary: I bought an IBM APTIVA 2171-585 with pentium pro processor (pre-installed with windows98). On windows98 the machine runs smoothly without ANY problem...
Summary: sounds like a name resolution error: -any problems with other machines? check WINS database. -just this machine? when you ping the server from the...
Summary: OK. On one side, we have the office network with an ADSL connection, two hub, a watchguard firewall and an NT 4 Server. We have 5 licenses for Remote...
Summary: Well, if you haven't done so, you can thorougly check the PCs specs, i.e. space, virtual mem, etc. Also clean up the network properties because somet...
Summary: a) I have Windows NT Server running on a Gateway 2000 486 DX2-66 with 40 mb of parity Fast Page RAM, and it is somewhat slow, but it runs. But then ag...
Summary: I have a situation where a Windows NT4 Server is serving 2-3 Windows 98 "workstations." Don't ask me, I did not set this up. Apparently it was set u...
Summary: On the non-NT machines, check the properties of the "client for microsoft networks" under network in the control panel. You should have a check in lo...
Summary: Yes this happens when other activities are being processed by your machine. CHeck task manager to see what is open and running. CHeck also any service...
Summary: Access via a client machine- check your event log for errors that relate to kybrd and mse drivers not loading- check the installation to be sure all t...
Summary: I have just returned a machine to PC World because of precisely this problem. My symptoms were: 1. Installed the new disk as Secondary IDE slave and ...
Summary: @Dave, Yes, double-checked each one individually and no .dbf files listed anywhere. I may try to add the file tpye, but there are computers all over ...
Summary: I have a script that works fine on all machines except 2. I have checked permissions, because i can map the drive manually, & checked the users profil...
Summary: The exception number is an memory address space and the access violation means an application tried to access a memory space that belongs to something...
Summary: I have a win nt 4.0 machine that i am replacing the drive on. originally I thought the scsi controller was the issue until the drive started to clunk ...
Summary: I was getting the same errors on a windows 2000 machine using an Abit RAID board. This board utilizes UDMA 100 (Highpoint) and I reinstalled the drive...
Summary: What is the special software? I would suggest checking any contract you have with the company to see if they should have left you a copy. This compan...
Summary: Hey i probably doing something stupid don't laugh just help thanks :) any tips would be great. NT Server Pentium 233 128MB ram 8 gig hard drive 10...
Summary: I had a similar problem and after a few hours and countless times of rebooting my machine with my fingers crossed I asked my self what in any way is d...
Summary: you have one machin that you say is ok , so to begin with you can compare i mean check if you have the same sevices on both comp than check in the pro...
Summary: I have a NT40 machine running Office 97. I have been working on a large Word document. Now when I try to move tables around Dr. Watson shows up very ...
Summary: Here is a Microsoft TechNet article which will shed some light on "Browsing Shares on a Windows NT Workstation or server using Windows 98": Jamie Broo...
Summary: This machine is a member of a domain. I can see all other clients on the network (20) except for two machines. I can access these 2 machines by ip ok,...
Summary: Firstly, How is your Server set up? 1)Workgroup or 2)Domain I know you prob have it set up as Domain ...but check anyways..:0) after that.... Try un-i...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
