Summary: I was just wondering, can you link two routers together? What I mean is can you send a cable for the output from one router strait to the input of th...
Summary: Last night I had 4 guys over for a LAN-party (for gaming). A couple people had routers, but only 4 ports, so we tried to link two routers together. ...
Summary: Ok, I am a total novice at this, so bear with my ignorance--I have read a lot of the forums, but still can't quite figure it all out. I have a wirele...
Summary: I have a hypothetical question. I know how to link two switches together with a crossover cable. My question is would performance improve if I added...
Summary: Yeah the parallel cable needs to be indicated as a crossover cable, meaning the wires inside have been twisted to be able to link two computers togeth...
Summary: Here's the scenario... I have a two story house with a cable modem in a downstairs office. Also, in this office is a Linksys BEFW11S4 wireless acces...
Summary: To link routers wirelessly, the router must have "Wireless Bridging" mode capability. Check the manual if your router supports that. If you're going ...
Summary: Why don't you just put another NIC on the desktop and then use a CrooOver Cable to connect to the laptop. And share the net with the laptop and bridge...
Summary: Hello! I have a somewhat tough setup, but I think it can be worked out to work well. First, I have three computers, a Dell Desktop running Windows M...
Summary: A router is a device for linking two networks together. i.e. the Internet, to your LAN. It uses Netwrk Address Translation to change the public IP a...
Summary: I recently converted the my dining room into an entertainment room, and got a Linksys WRT54GC because I wanted wireless access in the room, and also b...
Summary: If the wireless routers have regular RJ45 connections(wired)on them, you shouldnt have a problem. If they do the best way to do this is to connect get...
Summary: Ok, I have two routers ,D-Link DI-604, and D-Link WBR-2310. I have the WBR-2310 hooked up to my modem and i want to use the DI-604 on the other side o...
Summary: d85kennedy writes: "connect both routers together" OK crossover between lan ports of the two routers since you certainly can't connect the two wan por...
Summary: Can you ping IP addresses of the computers behind the linksys router?? What kind of cable did you use to connect the two routers together? You might n...
Summary: Why two routers when one is enough? Do either one of these routers have a built in switch? If so use it. If the routers only have one Ethernet port,...
Summary: my internet provider gave me link sys wireless router with ip address and gateway, and other software which i am using vsat is connected through netge...
Summary: Gee that was informative. Why two routers? How configured/wired? All or some having internet issue? Done all your routine maintenance [AV/spyware etc]...
Summary: Hi, a) I want to connect few computers to the internet, through two routers, with one router cascaded to another router. Both routers are wireless ro...
Summary: I currently have two routers connected to a cable modem. The second 7-port router is connected to the first 4-port router's port number 4 via WAN. I c...
Summary: Ive already posted a similar topic but to no success. Can anyone give me a step-by-step guide of how to link 2 laptops together to play games such as....
Summary: ok, well i already posted but didn't get any responses. perhaps my explanation was too long and tiring. i'll truncate it, and if you're confused, refe...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
