Summary: Have you tried reinstalling the drivers? I have a Lexar Jump drive which needed a driver for Windows 98 which I downloaded from the Lexar Web site. h...
Summary: Hi Most USB 'Flash Drives' or 'Thumb Drives' or 'Jump Drives' or whatever they are named by the various manufacturers usually require specific drivers...
Summary: My Personal Experience would agree with post #1. I have 5 different Thumb/flash drives and have gone to the manufactures web and downloaded the Win...
Summary: I have the same driver that you have been talking about i went to WWW.usb98driver.com and downloaded the driver however, i still could not get the jum...
Summary: You said that you : "can not use my jump drive because I do not have WIN98SE." I would say that you can use the Jump Drive. I have a Lexar JumpDrive a...
Summary: I have Installed a PCI USB 2 card which require Win98SE on a Win98FE computer with no problems, I have also Installed the Lexar USB Jump Drive drivers...
Summary: Now this morning was copying some photo's from hard drive to but on flash/jump drive. Anyway had eye surgey yesterday. Did something wrong. Saw It was...
Summary: Hello everyone, There are drivers from the Lexar site for Win98 users. The site says no drivers needed, yet there is a note, *Windows 98 users will n...
Summary: I tried the win98 boot disk and the first win95 boot disk. It wouldn't load the OS from the CD. I got an error message. How do I find out what model t...
Summary: i'm trying to transfer files from one laptop to another using a jump drive. Trouble is I am using a Sony jump drive and it cannot find the driver for ...
Summary: Hello I just installed win98FE on a pent-100 with 32meg ram on a 2gig..I added a 4port usb card and drivers for a lexar thumb drive..all works well..I...
Summary: can anyone help me find or does anyone have the restore disks for a gateway 2000 E3000 machine i dontknow what to so with this thing someone gave it t...
Summary: i looked on the dell and IBM website for the drive and didnt find anything that matches or is even close to the one i have. i found sone refurbished o...
Summary: emptying your browser's cache (temporary internet files) everyday is a good idea Why? As for scandisk, if one is trying to scan C: (c is the windows p...
Summary: Most CD-ROM's are configured jumperwise as SLAVE from the manufacturer. I would make the old HD set to Master on IDE0 and add the new HD as Slave to ...
Summary: You may want to provide more details. Are you planning on keeping both drives connected? Were you going to copy the 40 gig to the 200 gig? If you pl...
Summary: Thanks Derek for your input. I probably did jump too quickly to tell him to take it to the shop, but you, of all people know how I can devote myself t...
Summary: I want to format or reformat my hard drive. I have been jumping around the net looking for the proper steps to do so. (Format, load windows 98, driver...
Summary: Sounds like everyone is jumping the gun and solving the "problem" before the problem is even defined! Nothing in your post suggests what is REALLY wro...
Summary: Hmmmm.....??? Well I installed a 2nd HDD (Maxtor) and jumped it to primary slave to the primary master on the same ide cable. I used the middle connec...
Summary: I haven't jumped on the SATA bandwagon yet, so I'm not familiar with setting up a dual boot system using one SATA & one IDE HDD. You could just partit...
Summary: Hi Lu / Ladybird, You should have nothing to worry about. Your add-in RAID PCI card will work as a regular hard drive controller card, as long as...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
