Summary: Hi Macfriends, I have just been given a laserwriter select 360 by a friend. I have an apple 7300/200 but my only access thru the net is thru a PC. can...
Summary: I hooked up a gPort to my G4 (Yikes model) and into my old laserwriter select 360 printer. I'm wondering what driver I need in order to actually use t...
Summary: I use an iMac G3 and print on an Apple Laserwriter Select 360 printer that I had purchased as a refurb months earlier. Everything was working just ...
Summary: OK I got the modem to work off the ethernet hub BUT I can not get the printer (Laserwriter select 360 going to a farallon device which is then conv...
Summary: How do I connect an Imac G3 to an older LaserWriter Select 360 which only has a parallel, serial, and local talk connections. The Imac does not have a...
Summary: I have an old select 360 which prints beautifully, but cannot print from MAC 9600 on system 9.2.2. (serial printer port). Have talked to many diffe...
Summary: Hi, I have a Powermac 7300/200 running OS 9.1 and a LaserWriter Select. It was given to me as a present (the printer), and I have no idea how to set i...
Summary: I would like to use a LaserWriter Select 360 with my iMac, but there is the obvious problem of interfacing the printer, since it only uses LocalTal...
Summary: I have a Laserwriter select 360. I am using os 9.1 and laserwriter 8 driver on an apple g3. The printer worked fine using appletalk on an ethernet net...
Summary: Ok, ive searched through these forums and in general on the net and nothing ive tried so far has worked. The school i work at has 2 laserwriter select...
Summary: The driver I have on disk will not install completely, so I need a driver for my hand-me-down Laserwriter Select 360. I've heard it will work with...
Summary: I have a laserwriter select 360 which up till now has been flawless. Suddenly I'm getting a half inch grey stripe printing down the vertical edge of e...
Summary: Anyone know if it's possible to use my LaserWriter Select 300 on my G3 Beige Tower which is running OS X? I hate to get rid of this great printer. A...
Summary: I recently purchased a USB to parallel printer cable to connect my LaserWriter Select 360 to my iMac, using the LaserWriter's parallel port and one...
Summary: Did something stupid and now my LaserWriter prints gibberish. Sent an unencapsulated .ps file to my printer (postscript 2 enabled Laserwriter Select 3...
Summary: I have a new iMac DV with os9 and 128 megs RAM and have connected it to my Apple Personal Laserwriter NT postscript printer through a Farallon iPri...
Summary: Can anyone tell me exactly what files I need and where they go in order to make an Apple laserwriter Select 360 work with my 9500? I cannot get it to...
Summary: I had the same problem. I wanted to use my laserwriter 300 with my iBook. I got the Keyspan 28x USB to serial converter. I have system 9.1 running and...
Summary: I'm pretty sure the PLW NT needs its own driver. Is there a Personal LaserWriter selection in the Chooser (as opposed to LaserWriter 8, which is w...
Summary: This printer should work fine with Laserwriter or Laserwriter 8 print drivers. These come as part of MacOS but let me know if you need a copy. Cheers...
Summary: My wife has a Mac Laserwriter Select 310 printer. We would like to use our non Mac PC's to print to this laser printer. Can this be done? If so, wh...
Summary: I can expand on the above. The Laserwriter was connected to the imac's ethernet port via an 'AsanteTalk' Ethernet to Localtalk adapter (http://www.asa...
Summary: The LaserWriter 300/LS driver is installed by default on system installs as far back as I can remember. Check your Extensions Manager to see if it ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
