Summary: How should I set up my hard drive, dvd drive and cd burner drive jumpers? HD as Master DVD and Rewriteable as cable select or dvd and rewriteable as ...
Summary: I am stumped. I have an IBM PC 365 duel processor pentium pro w/ windows 2000. Multi processor drivers are all installed but my bios is not detecting ...
Summary: i own a SOYO KT600 Dragon Plus v1.0 motherboard i am trying to set the fsb to 200mhz. I need to know which jumpers to click on the website is not very...
Summary: I'm wondering a little (a lot?) if part of the problem is the issue of W2K being ntfs5 (based) and NT4 being an ntfs4 based OS. NT4 can read ntfs5 (vi...
Summary: Greetings, so far i formatted a 20.0 gig HD, upgraded my 64mb of ram to 128 EDO. not sure of the mobo manufacture but its has the intel430VX chipset, ...
Summary: is the video card, the cpu and the ram the only things installed on the mobo? does the cpu fan turn? are all the connections correct? did you reset th...
Summary: try reseating the processor, see if there's a reset jumper or a jumper to clear the cmos after you have remove all your expansion cards. ps is probabl...
Summary: Thanks for all the input. For sure the files are not NTFS. I even tried to set up this drive as a slave drive because another drive I have with win98 ...
Summary: Hi Smow, The problem may reside on the Hard drive jumper setting that can actually restrict the total size to 32Gb, I have a 60Gb Seagate and this opt...
Summary: When I turn the computer on it recognises the hard drive, the CDRW/DVD drive but it says "Checksum bad, F1 to load default values and continue or F2 t...
Summary: heh, I made a boo boo. i was plugging something into my computer, had the case open, and i turned it on, and um, SOMEhow one of the metal connectors ...
Summary: Well it could be a Master boot record virus but likley not. It sounds more like a hardware problem, try pulling the bios battery on the board, or if y...
Summary: Hey Gang, Here’s a strange one. I have W2K running on an FIC AD11 motherboard with an AMD Athlon 1.2GHz processor. I have started to use an USR Courie...
Summary: Ran into what for me is a strange problem. I was trying to install Win2K on a hard drive that I pulled out of another computer that had Win98 on it. I...
Summary: It looks like your CD-Rom and Burner might have a conflict check your irq settings. Check the jumpers on your CD-Rom and Burner and make sure it is se...
Summary: I think what you mean is that you had win98 on C: and win2000 on D:, then you formatted C: and now you can't boot to your win2000 drive anymore. Is t...
Summary: Check your bios and choose your boot up option make sure CD-ROM is before hard disk. Also does your computer detect your CD-ROM when booting up ? If ...
Summary: Sometimes Win2000 balks at newer hardware that requires drivers not available in 2000. I have had trouble with ATI series cards that require DX9. Wh...
Summary: Here is my tale of woe. System: ABIT BF6 Celeron 566 MAXTOR Ultra ATA 100 card Two MAXTOR 40gb Diamond Max drives Sony DVD Drive Panasonic CD-RW Windo...
Summary: Hello Sir. I have two harddrives I installed the 20GB and I want to installthe 4.3GB in the same computer.for a 2/333 Pentium. I understand that you c...
Summary: Rather than just launch into a repair routine scenario... perhaps you can post back first with exact HD arrangements: What is on Master drive - i.e. p...
Summary: OK, lets elaborate on this "dead" D: drive. Does it spin up when powered on? (put your hand on it, and power up) Try a new cable, re-seat the cable. I...
Summary: oo... wellz i know screw the motherboard in really tight can be a problem... I would take out the mb and put it on top of a box... which should be on ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
