Summary: is it possible to join mother boards together to use both prossecors at the same time? And also i have apentium 2 mmx 233mhz prossecor it's won of the...
Summary: Is it ok to underclock my processor. I have AthlonXP 2000+ (1,67 GHz/133 MHz bus speed) and I want it to go at 100 MHz bus speed (so it will run at 1,...
Summary: Is it possible to overlock Core 2 Duo processor (E4300) 1.8 GHZ using Asus P5VD2-MXSE Motherboard if yes then plz provide a guide and how do u change...
Summary: Is it possible to overclock a Packard Bell Force 101CD? I'm new to overclocking, so I wanted to use an older PC to start off with. If it is possible...
Summary: I was wondering what is the best method or way to apply thermal grease to the heatsink. I just want to make sure I don't get too much or too little o...
Summary: i got my 1800+ running at 39 idle and 43 after 2 hours of playing sof2 at a high rate.not using water cooling system and doudt i would ever try to.I h...
Summary: Hey, i have a compaq 5WV254, and it has compaq's own mobo. It has a 700mhz Duron, 384mb 133ram. I don't think the mobo has jumper possibilities, and t...
Summary: hi all, im a bit new to all of this, and im building my first system. i have an amd 1800+ cpu, 1.53ghz and a thermaltake volcano5 HSF. on the box for ...
Summary: It looks as if summer 2004 is a big year for new tech to come out. Right now i've got a decent xp2800/ddr333 system, but i've got the cash to upgrade ...
Summary: Guys, Is it possible to O/C my rig?? AMD 1800 XP ECS K7S5A Mobo 750 SiS Chipset ( i think) 1024 DDR PC2100 Ram If so,How can i do it, Theres nothing i...
Summary: Have a celeron 500Mhz PC. Motherboard at 66 FSB with 320MB of PC100 SDRAM. Is it possible to overclock this processor and if so by how much. And, or a...
Summary: I have a 128-bit Powercolor Radeon 9550 256 mb AGP8x video card and was wondering if I can safely overclock it to a Radeon 9600 using the Atitool or s...
Summary: If you read my last post (thanks to everyone btw), I think I'm going to get a Barton 2500+ and ABIT NF7-S mobo (it has serial ports, but sometimes ya ...
Summary: Is there any significant difference of performance between pc2100 rd ram and pc2700? I do quite a lot of multi tasking, so is it enough for me to use ...
Summary: I have ordered a a7n8x, xp2500(333 bus) and a pc3200 cl2 ram. i want to overclock it to the max!! my target is to hit at least 190*11.5. i have read a...
Summary: when i bought my cpu i got silcone heat paste.... but im told silicone is not very effective...what would your thoughts be on artic silver 2,3...is i...
Summary: Not long ago, someone had posted something about applying thermal paste to the heatsink bottom as well as the CPU core. I'd never heard of that before...
Summary: "but the heatsink is still cool to touch." That is most likely your problem. A heatsink should not be cool, it should be HOT. It's job is to take the ...
Summary: I don't know why I'm seeing minus points for good answers? 1. you didn't post what your temps were prior to removing the heatsink. 2. you didn't state...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
