Summary: I am trying to print normal txt file through a VAX C prog using SYS$SNDJBCW system service. I have TCPIP print que set on the node. The job gets print...
Summary: Hi all, Please tell me how could I change IP for a VMS station ? ... and I bag you reply to my previous posted message reffering to "New queue for HP ...
Summary: We use dcps an have our queues set to use a postscript overlay form. Recently one printer, a DEC LNC02 died and we needed to install a NETPRINTPOCKET...
Summary: Hi Im a newbie to vms and im trying to change the IP address of the network adapter. When I go to TCPIP> and type set i get -What: then _Network name...
Summary: sanas, The short answer is that a single device queue exists on only a single device. Speaking more completely, the way to achieve what you are trying...
Summary: Please tell use what version of which tcp/ip stack you are using. If you are using TCP/IP Services for OpenVMS, make sure the version is at least 5.4 ...
Summary: OpenVMS supports sharing of tapes when the 2 machines are in a cluster (via TMSCP). Not, just DECnet or TCP/IP connected. There are some 3rd party dev...
Summary: Does anyone have a scrpit to get the mac address from an ip address. the UCX ARP command only works for the local subnet and I need to get the mac ad...
Summary: UCX is an IP stack. You will also have layered software on top of that, that provides the services for sharing the directories. If you use Netbuie as ...
Summary: Hilliard, The baseline OpenVMS installation procedure does not install products beyond the baseline. I forget the exact list, but my recollection is (...
Summary: Running UCX 4.2 - ECO 1 SYS$PRINT is the default print queue and prints to an HP Jetdirect IP 10.1.1.8 (currently idle). I did INITIALIZE /QUEUE MLSY...
Summary: Uite cum am facut eu pentru imprimanta $! setare printer HP8150 prin TCP/IP $ INITIALIZE/QUEUE/START/ON="192.168.1.16:9100"/PROCESS=UCX$TELNETSYM /des...
Summary: Yes of course VMS can send mail anywhere on the internet. It just depends on the TCP/IP stack installed. Before going into details and setup commands,...
Summary: I am having problems running a com file from a remote host. The target host, computer2, has a com file which does some simple system checks. The com f...
Summary: Has anybody a solution to automate a scheduled daily file transfer between a VAX box running VMS, DECNET and LAT to a UNIX box running TCP/IP and LAT....
Summary: If you have a TCP/IP stack on your OpenVMS and NT boxes, than easiest is to install the Unix printing services on the NT box, and use LPD/LPR for comm...
Summary: That depends on your IP stack and version. But it is possible with the latest release of Compaq's UCX/TCPIP : http://h71000.www7.hp.com/doc/73FINAL/6...
Summary: We have little knowledge about TCPware for OpenVMs, lately we encountered TCP connection between two servers hang and require the services to be rese...
Summary: My Question is simple: What do I need to do, using C and the System Services (NOT sockets), in order to multicast a message in OpenVMS. I use UCX and...
Summary: I am running OpenVMS 6.2 on a multiprocessor Dec machine. I written a Tcp-Server that accepts job requests from a remote client, and passes these requ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
