Summary: Hello All, I am trying to install the Win95 upgrade to an older laptop computer. I just cannot get interlnk and intersvr to work. I have the machine...
Summary: Interlnk and intersvr will run on an 8088, I have DOS 6.22 installed on my Compaq 8088 and I have linked it up to a pentium system before. ...
Summary: Surf to: http://www.powerload.fsnet.co.uk/ open the ms-dos resource page, download "OLDDOS.EXE" it should have interlnk.exe & intersvr.exe If not, e...
Summary: Hey thanks a lot for helping me out. I was able to get MS-DOS v6.22 onto my laptop w/o a hitch. I now need to find a way to get it onto my Desktop. Wh...
Summary: Hi, I have a few old network cards, Etherlink II (3c503) to be exact, and I try to find a use for them. I tried to make a private LAN, with Otex LAN, ...
Summary: This may be a little late but I found a good way to do this is to make a boot disc and add interlnk and intersvr to each one. You'll also have to mak...
Summary: Microsoft MS-DOS 6.22 ===================== Packing List for 1.44 MB floppy disks -------- This file lists the contents of each of the three Setup dis...
Summary: Try Interlnk and Intersvr. They are a bit limited in use and you need serial or parallel cables but as long as you don't have much of a network they a...
Summary: You have all the tools you need, ( except the cable-You will need to make one yourself), if you have DOS 6.22. The programs are also hidden in win 9...
Summary: As the reply above me mentioned, you could install DR-DOS from the hard drive and PC-DOS is no different. As for the parallel port, you could connect ...
Summary: Look for the packing.lst file on Disk 1. Aw hell, here it is. Microsoft MS-DOS 6.22 ===================== Packing List for 1.44 MB floppy disks -----...
Summary: HAHAHAHAHA Why not! DOS 6.22 boot disk with CD drivers giving options to run 1. to standard DOS prompt 2. Efdisk (Disk partition proggie) 3. Ghost (f...
Summary: Well, when you try to access A:, you should see the diskette drive blink with it's little diode and a motor should start spinning. If it doesn't, your...
Summary: You can use interlnk.exe and intersvr.exe, which came with DOS, but (as far as I know) not with WIN95. If you are running a fat32 hd on the WIN95 syst...
Summary: Hi W I wonder if U mean control, as in access to, or as in take total control over... Access can U get with interlnk.exe/intersvr.exe. I need sum help...
Summary: net.exe, that comes with Win9x, is a Windows program. The easiest way to transfer files is to use Interlnk and Intersvr (these should be found in a fi...
Summary: On some computers DR-DOS will not load from the C drive, but a floppy boot worked. If you use MS-DOS interlnk and intersvr and one of the drives...
Summary: dos 6.22 should have come with a couple of programs called interlnk and intersvr, it uses a null modem cable or null parallel cable, its not very fast...
Summary: Laplink if you have it; however, INTERLNK and INTERSVR are DOS commands which you certainly already have. They do not work well from windows. I...
Summary: I guess you are running DOS. Not everyone seems to understand this. Well, if you have like DOS 5 or later (I think) there are included the programs IN...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
