Summary: i was wondering i got a hp pavilion 522n i got to get a pci video card cause it is slow i was wondering where are the slots in the computer and what t...
Summary: I have a Socket 370 microATX ASUS CUW-RM motherboard with onboard 3D Video,Celeron 700,Windows XP.I tried to install a Vanta TNT2 8 meg PCI card into ...
Summary: Hello, I have a computer where the video card on the main board is getting very loose causing the monitor signal to go in and out. I installed a pci c...
Summary: Hello, I'm trying to install a PCI video card on my HP. I bought an ATI Rage 128 Pro 32mbSDRAM 64 bit card. I followed the HP guide to installing a ...
Summary: Im trying to install a Verto Geforce4 MX 440-SE 64mb SDRAM PCI video card for my HP Pavilion 511w modle. I have done everything windows told me to do(...
Summary: My AGP video card recently died. So I borrowed a PCI video card of a friend and stuck it in. It all worked but now when i get to the desktop and after...
Summary: Hi, I am building a new PC and i need some help, i am going to be using a radeon 7000 pci video card , as i accidentaly bought a mobo without built i...
Summary: My AGP Card dicided not to work one day, so i couldnt uninstall the drivers...So I put in a PCI video card and booted fine until i get to the desktop ...
Summary: Try this site for their reviews of pci cards. Unfortunately they will also give you the bad news that whatever pci video card you get it will not come...
Summary: Have installed a new nVidia MX200 PCI (owner didn't know if he had AGP slot)video card and driver from the disc. Device Manager shows this card (which...
Summary: Hello, i have a Compaq Presario 5140. Ok i know that before you install a new video card you have to disable your current video card or somtin. But Ho...
Summary: I just downloaded an Omega Catalyst 2.5.97 Driver for my ATI 9200SE PCI video card. However, i haven't installed it yet because it asks me to uninstal...
Summary: Hi I installed a radeon 9200se (PCI) video card. Now, when I resume from standby, the monitor does not resume and pc must be shut down. My bios has 2 ...
Summary: I've got everything to run SIms 2, except a valid Video CArd my current one is : SiS 650 Rev 00 I think that's it anyway, could be looking at the wron...
Summary: Hey, I'm going to buy an Nvidia GeForce 5200 and I was wondering how to disable my old integrated video card. Do I have to do anything else when...
Summary: I just formatted 98SE away and clean installed XP Home. It had drivers for everything but my video card above. I checked it's box and see that 2000 an...
Summary: Did you unistall all of previous video card properties and revert to deault VGA settings before install of new card? If it's an onboard video as Bryan...
Summary: Here's the problem. A couple of years ago I bought an ATI Xpert 128 PCI video card which worked great on my old computer under Windows 95. Now current...
Summary: hellooo everyone.. I would really apreciated if any of you can help me here... here is the problem.. I was removing the monitor cable from my computer...
Summary: Hello, I have an onboard video card and need a better one. Is there any way to disable the existing onboard video card so I can install a PCI video c...
Summary: if you already have the cards, simply insert both cards, and install drivers (if needed) and windows xp will detect them and displaysome new features ...
Summary: Look in device manager to see how the card shows there. If there is a yellow or red punctuation mark next to it post the message. Of course you will...
Summary: Try safe mode & then check Device Manager for problems with the video card install . How to start Windows XP in Safe mode http://service1.symantec.com...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
