Summary: I installed new hard drive and 4 new mem cards. Now the keyboard and lcd screen does not work. I have checked all connections and everything is secu...
Summary: i wanted to get rid of my old hard drive and install a new one. i know i have to make some kind of boot disk and partition the new hard drive and stu...
Summary: okay, when I go to F2 for BIOS, and look at Boot Sequence, it says: 1. Diskette drive 2. HDD (not installed) - what will it take for it to recognize i...
Summary: Hello all, **Some of my questions may seem remedial, apologies, but I am an amatuer and I'm also stuck. And, I apologize for the length of my rant/in...
Summary: My 40gb hard disk is full. I want to install a slave hard drive. There are no slots on the board available. I note that the existing setup is as fo...
Summary: ok, i got a new hard drive, and i need to know how to install it to my bios, so i can use it. right now, my bios isnt detecting it, although the red h...
Summary: I have a 40GB hard drive and i want to install it above my other 40GB hard drive. the problem is that the power cable that connects to the motherboard...
Summary: I currently have a 40 gig hard drive. I am running out of space and my speed of my computer is gradualy slowing down. So I have decided to buy a 120 ...
Summary: I need to install a new hard drive but i dont really know how to go about what to do after physically installing it. ie settings, bios, cmos, installi...
Summary: I just bought a new hard drive to replace my primary master drive, however when i plug it in, my primary slave is detected either as a secondary maste...
Summary: I am trying to install a new processor, motherboard and hard drive... all seems to be working fine except when i install windows onto the hard drive i...
Summary: I am having major issues installing a second hard drive for storage. I am running XP. The hard drive is installed and I can get the BIOS to recogniz...
Summary: Check both ends of the cable to the CD drive. You might have caused one of the ends to come loose when you were installing the new hard drive. ...
Summary: I have been told by dell that the problems I am experiancing are to a faulty hard drive. I have purchased a new one (not from dell) and have installe...
Summary: i bought a used panasonic cf-27 toughbook off ebay. i knew when i did that it would probably need a new hard drive, so i got one, 30gb. when it arri...
Summary: Have RAID 0 setup currently gong to get new better HD whats the best way to get the info from old HD to new one(s)New drive will be the caviar blcak...
Summary: I just added and installed a new hard drive 40 GB to my existing 14 gb hard drive. I've ead that I can combine these 2 into one big drive that woould...
Summary: I just went out and picked up a secondary hard drive got it all setup and that works fine. My problem now is the secondary hard drive is now named D: ...
Summary: Install the second hard drive as slave to the master bootable hard drive on the primary IDE port and on the gray connector.The new hard drive will be...
Summary: I have installed a new hard drive and can not transfer my old "My Documents" to my new hard drive. It always gives me an "Write Protected" error or a...
Summary: I was in process of installing a new hard drive. I had a few minor set backs as the O/S disks I had were good. So while I waited to get the right disk...
Summary: I'm working on a very old unit, I want to install a new hard drive, a Hitachi Desktar 60gb, 7200rpm the motherboard is an Iwill BS100. I know its an o...
Summary: First things first. If it is a BRAND new hard drive, is it partitioned yet, and formatted? If no, you need to do that first. (Let us know and someone ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
