Summary: have tried installing os/2 warp 4 on a 9300 series with 130 megs/ram, 8 gig hard drive. (intel 500 pentium 3 chip) made 3 installation floppys, but th...
Summary: Installation fails on disk1, it hans when loading the pcibus.snp file. I downloaded and tried the latest pcibus.snp file from ibm, but to no avail. H...
Summary: I have tried installing Warp4 on 2 IBM 300PL with 500mhz cpu's. I have updated install diskettes for 8.3gig plus hard disks. After copying files the i...
Summary: have tried installing os/2 warp 4 on a 9300 series with 96 megs/ram, 12 gig hard drive. (intel 366 pentium 2 chip) made 3 installation floppys, bu...
Summary: Thanks for the reply. I am using the updated installation disks. I was able to get past the swapping error by moving the boot manager to the first por...
Summary: p3 733 mghz 128 sdram 20 gig hard drive ok here's my problem , i accidently knocked my pc when it was booting up , the hard disk stopped working and i...
Summary: I have a really big problem with installing OS/2 onto a new soyo laptop. (External CD in IDE and floppy on parallel port). On install frst disk is ok ...
Summary: After shutting down OS/2 (v.3) and attempting to reboot with CTRL-ALT-DEL, I get "non-system disk error." This also happens if I am in DOS and try to...
Summary: Hi people! Yes, I installed the OS/2 on the 40GB IDE hard-disk using DANIs506 driver. But, now I have a graphic card ATI Mach 64, and I couldn´t inst...
Summary: I am using standard Virtual PC 7 (also tried upgrading to VPC 7.0.2; didn't make any difference) for Mac to try to install OS/2 4.52 ("Convenience Pac...
Summary: I have seen that problem before on installing Micron machines also. I have gotten the vmouse error on boot up and install. I have changed the mousety...
Summary: I went through the first half of the install and on reboot I get this message... TRAP 000D AX=0030 BX=01F8 CX=0009 DX=0000 BP=F8EA SI=0067 DI=13A0 DS=...
Summary: Well, I looked through all 1200 pages of the manual supplied by IBM, and I did find a list of various error messages, but the book also recommends typ...
Summary: Trying to install warp on a sony PCG-505S laptop. As soon as I insert disk3 I get the following error "OS/2 is unable to operate your hard disk or dis...
Summary: I am trying to install OS 9.2 on a StarMAx 5000/300 motorola which curenntly uses OS 9.0. On Start up I get the message will nopt work on this comput...
Summary: I downloaded 3C509x2.exe but cannot figure out how to install it on OS2 3.0 Warp. I extracted the file under /OS2/3com and ran INSTALL.exe but that ju...
Summary: I am trying to install OS/2 Version 4.5. I managed to load from the diskette 1, 2 but at diskette 3, error message occur. Have anyone encountered the ...
Summary: Hi Malcolm ! Well, the new drivers coming with recent fixpacks (ie FP13) allow you to use Fdisk and to format and use >1024 Cyls harddisks. But as far...
Summary: eCS second stage install fails on boot. error message is something like "can't operate hard disc or diskette drive, restart the system " Any help is ...
Summary: Trying to install XP on an abit BP6 dual 433 celeron with Samsung SV6004H (60GB) on primary master of onboard IDE (not the HPT366). Installation goes ...
Summary: I would like to install Excel 5(The old win 3.1 version) on OS/2 ver 3 however my copy of os/2 does not have win-os2 installed. Don't I need this to ...
Summary: Maybe if you didn't abuse the laptop so much it would obey you more readily. If you have an OS/2 installation CD, all the files on the diskettes are ...
Summary: anyone know how to install several printer drivers (lexmark s optra 1855) on a network at the same time instead of installing them one at a time? ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
