Summary: I am trying to load NT 4.0 on a laptop with a swapable FDD and CD-ROM. This is a Panasonic CF-25 48Mb Ram 2G HDD. New unused copy of NT bought off Eba...
Summary: Has anyone tried installing NT 4.0 on a power pc mac? I know my NT CD contains the 486/PowerPC/MIPS processor installation files, but has any one trie...
Summary: i am trying to install a NT 4.0 workstation on my HP omnibook 500, it has a 10G harddisk, PIII 750 and 512 mb memory i have partition the disk to 1....
Summary: I'm trying to install NT 4.0 on a re-conditioned Compaq machine and on the setup program it searching for mass storage devices and only sees the CD-RO...
Summary: I'm running NT 4.0 SP6. I've had to replace my boot/OS drive, C:. All files from my original C: have been transferred to the new C: and I have no tr...
Summary: I have created a 2GB partition on a 40GB h/d in which to install NT 4.0 B/O, but always get a message that states that the DOS portion of the setup se...
Summary: Hi , I have a suggestion, Pls find for an NTHQ.EXE file on our NT CD which should probably be under the i386 directory.Run the file which checks the s...
Summary: i have bought one 20 gb segate harddisk and wanted to install NT 4.0. what i did (i) boot with windows 98 bootdisk ,disable with large disk support ...
Summary: Have a 10GB Win98 FAT32 harddrive (Drive-A). Planning to add a 27GB harddrive (Drive-B) to install WinNT 4.0 Server there: - Use Win98 to format a 2G...
Summary: Hi, I'm installing Windows NT 4.0 on a machine that has an IBM 20.5G bytes IDE hdd. Since the Hdd is greater than 8 Gbytes I downloaded the Atapi.sys ...
Summary: Our company is looking for an integrator to load NT 4.0 on a new IBM T42 Laptop. IBM no longer supports NT on new models. Our customer (Fed Gov't) ha...
Summary: I want to install NT 4.0 on my old computer. the problem is that the CD-rom does not have an ATAPI driver. So I can not install it. I think the only a...
Summary: Dear Pilgrim, Saw your reply to Ed - I need some help, if you are so inclined. Formatted 9.6GB HD as 16-bit, installed NT 4.0 on primary partition. Wo...
Summary: I trying install Windows NT 4.0 (SERVER) on SCSI Hard drive I useing "Adaptec 29160 SCSI"card And " Compaqpc Atlas 10k 18 WLS " Hard drive. Hard drive...
Summary: howdy! got a question for the collective. i'm going to install windows 98 and windows nt 4.0 on a 2 disk system. i have 2 15gb ide deskstar drives. i'...
Summary: I want to install NT 4.0 on my Toshiba Satellite 2545CDS Laptop. Any ideas on where I can find good directions? I am planning on doing a fresh insta...
Summary: Just brought a brand new shiny Segate ATA-66 EIDE 17.2 Gig disk and thought I would install NT 4.0 on it instead of my more usual Win 98. Placed it in...
Summary: I am doing a new install of NT 4.0 on a 60 GB hard drive. I have done the install and have created a NTFS partition of 2 GB. I would like to have t...
Summary: While trying to install NT 4 Server on a machine I tried to set the maximum size of my partition to 4.1 Gig (the full capacity of the drive). The set...
Summary: I was trying to install NT 4.0 into one large partition. But it prompted 'The partition is too large', so I can't format it into NTFS. I have to div...
Summary: Want to run NT 4.0 on a 486 with 20mb ram. Computer is only going to do following: Run Netscape Communicator 4.7 Offline (to read HTML) Adobe Acrobat ...
Summary: trying to install nt 4.0, I have a 6.4 gig hdd. I have already particioned and it is booting form the cd first. it seems to have completed copying all...
Summary: I want to install winnt 4.0 on compaq proliant 3000 server having 3 x 4 GB SCSI hard disks with raid 5 controller card. How to install NT 4.0 on it. I...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
