Summary: I think that the 1750 has three CD-ROM interfaces on it-Panasonic, Mitsumi and Sony. Your CDU-33a usess the SONY. Make sure that jumper near the inter...
Summary: Im trying to install my cd rom driver onto dos 5.0 using downloads from the net. Its not working very well. My Config.sys and autoexec.bat look to be...
Summary: Hello, I really need help.. I tried to install my cd-rom by copying oakcd.sys from a boot disk, in c:\ then i put a line in autoecex.bat C:\WINDOWS\M...
Summary: Message: PLEASE tell me EXACTLY WHAT TO DO ( I HAVE NEVER DONE ANYTHING LIKE THIS BEFORE AND I DO NOT KNOW WHAT I AM DOING ) I have a Panasonic 8X ...
Summary: You can also re-install dos 5.x or 6.x after you have done this - install the cd-rom drivers disk that came with your cd-rom... this will give access...
Summary: Hi all, I'm also having the same problem, but using Win95. Don't know what's going on here, but post shows a cd-rom. I have the Sanyo crd-254-p also. ...
Summary: I need to install a CD-ROM in my 486 but I have never install anything in a computer where it was not plug and play. Do I need to access my CMOS and ...
Summary: I installed Windows 3.11 for Workgroups. I need to install a CD-ROM drive. The CD-ROM model is a SANYO CRD-1332P. Would a Windows 95/98 driver work on...
Summary: Hi. I've been buggering around this week with an old PC I have at home. I did only have PC DOS 2000 on it, and although it's got a CD-ROM drive I've l...
Summary: I've tried for 3 weeks to get 3.1 to recognize my cd-rom drive. I've searched this forum and tried all suggestions. Yesterday I replaced the cd-rom wi...
Summary: Tell you what: Do an internet search for OAKCDROM.SYS, then copy it to the DOS directory. Modify your config.sys file to say: DEVICEHIGH=C:\DOS\OAKCDR...
Summary: I have a new laptop and im trying to put win 3.11 and dos on to a partition of it. Will i be able to find cd rom drivers that will work on the old sys...
Summary: I have decided to make the jump from 3.1 to 95 but I am having trouble getting my computer to see my cd-rom. I have the 95/98 boot disk and I assumed...
Summary: Hi Thanx for the links, but I still can't get windows 31. and 3.11 to realize the cd-rom is there, I know there is a driver that you can use for most ...
Summary: Thanks everyone for all the responses and important information, it was incredibly usefull to me. I have opened up the computer ( which was quite the ...
Summary: Hi! I have a CD-ROM hooked up to my Sound Blaster Pro 2 sound card in my old 486DX4 100. I installed the drivers for it, but when I restart and it tri...
Summary: I run win3.11 or win 95 on a 486 with an older bios. I can get an ide CD-ROM to work in Dos, Win for Workgroups, from a WIN95 boot disk, and a Win 98...
Summary: Have resurrected my dead computer. Killed by a worm. Had to install Win 3.1 due to computer not loading CD Rom. Anyone know how to get it to detect...
Summary: my windows 3.1 crashed and now it will not recognize my cd rom so i can install Windows 95. I have the CD for Windows 95 and i also have disks, but t...
Summary: I had the Misfortune of coming into about 8 old pentium 200-300 mhz systems and now Im trying to get them up and running the one I am working on now I...
Summary: I recently upgraded from Windows for Workgroups to Windows 95. Windows 95 successfully recognized my cd-rom but I cannot get does to recognize the dr...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
