Summary: I've also seen people blow their $200 gfx card up from too high a bus speed on AGP. Don't be stupid when you OC when PCI and AGP get overclocked, too...
Summary: Just a suggestion not sure about you mb so i dont know the bios settings for deffinate. You can overclock, just dont take the pci/apg bus above 37 mh...
Summary: Only if your motherboard supports it (via bios or through switches/jumpers), but most boards don't. Overclocking the front side bus increases the spe...
Summary: The chip is being underclocked. Set the Bus Speed to 133 MHz. The system will then see it at the correct speed. For example: An Athlon XP 2000+ wit...
Summary: I insatlled an AMD K6-233 in a Presario 9548 and jumpered it as follows with the indicated results: 1) at 66MHz Bus speed with a 1.5 multiplier it did...
Summary: I was having problems with my sound card(board does not me set ration for bus speed for AGP/PCI), when I overclocked to 1.8Ghx (150FSB x 12/ 1.6Vcore)...
Summary: On my mob there is no option to lock PCI and AGP bus speed, so now PCI bus is 40 MHz and AGP is 80MHz, I was wondering if this is too much? (so far I ...
Summary: How do I change the FSB speed on my P4 williamette1.5Ghz.? And What are AGP/PCI dividers? How and why would I change these? Will increasing the Front ...
Summary: in my bios i have the option to set my agp to run at 66 if i set this at 66 will the pci automatically stay set at 33 when overclocking http://www.tw...
Summary: I have ebayed an Abit At7 (plain one with IDE RAID and no PS2 ports), AthlonXP 2500+ and a stick of 256Mb GEIL DDR to make use of an old case, power s...
Summary: The ability to lock the PCI/AGP is NOT included on all motherboards. Look thru your manual in the BIOS section & see if it's one of the options. If no...
Summary: Hello Please take a look at This screenshot I have Geforce 2 MX400 According to SIS SANDRA my AGP bus speed is too high. It's 89MHz. I looked in user ...
Summary: ok first of all my spec - amd 2400+, Gigabyte GA-7vrxp, geforce3 ti200, 550W psu. Im trying to overclock my pc but i cannot get bus speed past 145 -...
Summary: If you are overclocking using, which I belive you are...then you are increasing the speed of RAM, PCI slots, AGP slot. Overclocking the Processor is ...
Summary: Hi, The system is an AMD Athlon XP1700 (1.5GHZ) Processor. The following are more details Multiplier Factor: X11 CPU/FSB/PCI CLOCK: 133/133MHZ (2 x 13...
Summary: "sooooo what you are saying Jam, is that one should synchronise RAM and CPU bus speeds to the same figure" Exactly. "i didn't increase the VCore volta...
Summary: "when i say shorten the life of i mean everything in your computer is being overstressed when you reaise that fsb" False! If your RAM is rated at lea...
Summary: Does anyone have this mobo and can overclock the BUS. There is nothing in th BIOS to change the BUS speed (unless I missed something the 15+ times I c...
Summary: I'm no overclocker (at the moment) but figure that those of you who are would be able and kind enough to make suggestions on how to deal with the iss...
Summary: Hey Guys i'm new. Wanting to get a laptop. Is there much diff b/w bus speeds of 400mhz and 533mhz, in terms of performance? I know 533 is better, i ...
Summary: Hi, I have a DFI PS83-BL motherboard and an SATA HD giving me problems. In order to overclock, I need the "Async AGP/PCI/SRC" option enabled in the bi...
Summary: Sorry I neglected to give the info. The mobo is a Biostar M7NCD Pro. The ram ? I purchased it from e-bay and can not find who the manufacturer is, it'...
Summary: I don't think so, the bios for this board is very different than the other ones I've used so I'm kind of having to completely relearn the terms ECS us...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
