Summary: I just bought a WD 160 GB HD and have it with no jumper settings running by itself. I want to put a old Deskstar HD which died and i want to see if i ...
Summary: hi.. need help with maxtor jumper settings, i saw this information somewhere a some time ago, but cant find it anymore... i need to kno, how to put ma...
Summary: Every time I try to select using my hard drive on its own as the master it will boot up and then go to a blank screen with a blinking cursor and do no...
Summary: guys i really need your help. I have a laptop with a wiped hard drive. I am familiar with the the "set up from scratch" process, but i am stuck with a...
Summary: I am in the process of moving to the 64-bit version of Vista Home Premium and decided to upgrade my RAM in the process. I was hoping I could get some ...
Summary: Hey smeggy (or smeghead, if you like), does it read at 1150 (or close) in the DOS boot screen right at the start). If so, you have the Front side bus ...
Summary: OK, the best configuration would be to have your boot drive jumpered as Master on the Primary IDE channel(0or1) and jumper one of the optical drives a...
Summary: I have PII-350MHz with 256MB RAM, QDI Brilliant P6I440BX motherboard, Matsus---a UJDD410 CD/RW and Quantum Fireball EX-6.4GB HD. I am running Win98. T...
Summary: i am putting in a new hd in the cpu im building, what jumper settings should i use if this is the only harddrive? i cant get the system to detect my ...
Summary: Okay, i think im confusing my self and everyone else...ill start over... Im building a computer, i didnt want an IDE 133 HD because i noticed there is...
Summary: thanks for your guidance. i'll keep that in mind and will continue to check frequently. i do not wish to connect three drives at a time. i will be hap...
Summary: I need help. I have 1 hard drive with 2 DVD R/RW burners hard drive is showing on secoundary. haveing problems with jumper settings. Can I set both b...
Summary: If it's your primary HDD (the 1 with your OS) then make sure it's the master and the CD is the slave. Make sure you change the jumper settings on bot...
Summary: Hi all, could anyone help me with the following? I am making adjustments to an old computer. The motherboard is a GMB-P56SPC (Gemlight) and the proces...
Summary: Ok i have just bough a western digital 80gb hd(WD caviar SE, IDE hard drive)And i would like to replace that with my current hard drive seagate(ST3400...
Summary: i know how you all hate it when people ask questions w/out looking for the answer themselves by reading the instruction book and whatnot but i read my...
Summary: He Dears. I have a problim that i have a Motherboard of Intle company model PCIset SB82371SB/SB82437VX and a processor of Intel's MMX 200 Mghz. This p...
Summary: Richaard's advice is good. When using a slave hdd, sometimes this affects the jumper settings of the master. Typical settings available are:- Master M...
Summary: hi, i was wondering where i could find jumper settings for different cpus?. I am planning on upgrading my computer to a Pentium III 700 or approx. spe...
Summary: Help! I need a manual for my mobo. The one supplied didn't detail jumper settings. The website for Pc Chips is crap. Any ideas where else plz, all he...
Summary: Hi i see some people here know a lot of pc and on-board graphics motherboards, i need help with my on-board graphic card, cos its only 16mb really old...
Summary: I agree with jam. For whatever reason, most BIOSes don't support legusy USB devices by default. That means you need to change the setting and to do ...
Summary: Hey, thanks for the links ... Still my flashing procedure stops when i enter the new bios image file name. Does this have anything to do with BIOS JU...
Summary: hello, this is my first post so please bare with me as I will try to explain the problem I am having and would like to fix if I can? First I will list...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
