Summary: no option in HDD type for CDROM. If I just leave it unfound or user defined [all zeoes] a win98 boot disk can't find it when it uses its cdrom drivers...
Summary: Hello everyone, Today I wanted to create a new Game computer with my old installation of DOS disks, so that I can run Doom, and older games witho...
Summary: Interesting...maybe I'm not in BIOS after all. All it says when I press escape key at bootup is 'T1850 Setup', with: Memory, (Total:4096, base: 640, ...
Summary: I need help with Cdrom drive on a compaq prolinea running win 3.1 the drive is showing up in bios o.k. on startup everything seems to be ok I get mess...
Summary: My hardrive crashed. After reformatted, load DOS, then load CDROM driver - Went through installation fine. When reboot, received this "Packed file is ...
Summary: is mscdex installed too? i dont know if itll help , sounds as youve got a real dinosaur on your hands (must work in a school or somethin' ;) i dont ...
Summary: Hi, In BIOS setup make sure you have the sequence of booting A then C. If you have C then A here change it to A,C and try to boot with floppy. And by ...
Summary: i bought an old UNISYS PC, is a P100 with 32Mb of ram, 1gb of HD, i tried to put a samsung 52x CDROM, but the BIOS didn't recognized it, should i try ...
Summary: The HDD is a older model, I had to get info from quantum for it, but yes the jumper is set to master/master-slave. There isnt any ide onboard this mod...
Summary: Hi all, I'm also having the same problem, but using Win95. Don't know what's going on here, but post shows a cd-rom. I have the Sanyo crd-254-p also. ...
Summary: Interface Board or CDROM drive is not ready after loading the correct CRDOM drivers which were Panasonic as I looked up under the Model number which C...
Summary: I have a 486dx2 ibm aptiva 2168-26p that i pulled out to work on well i want to try to get a bios that will let me boot from cdrom please help ...
Summary: Regarding my previous post,(no drives found),W98 or W98SE boot disks did not work either. I went into bios and ran a system check and found these err...
Summary: I finally installed my cd rom with sound card onto my 486dx4 100mhz computer by compaq and it all installed fine. But I put a cd into the drive and it...
Summary: I'm trying to help a buddy with an OLD PC (circa 1985). This PC is dedicated to running a legacy Win 3.1 application. Someone screwed up his system...
Summary: I have 2 questions I would be most obliged to have answered. Number 1 my computer info: Processor: Intel Pentium I HD's: 2 Formatted Conner Periphial...
Summary: "I do not have a directory under dos for CDROM" What do you mean?? You should locate the CD driver for your CD-ROM, and then load it in CONFIG.SYS as ...
Summary: Help have win 3.11, floppy drive is found in dos and by bios at startup. But is not in windows or win/dos. How can I get it back. Think daughter has d...
Summary: Looking again at the original post, the problem is not a driver issue. He first must get the system to boot up with the CDROM cabled in and then worry...
Summary: I have a poor (literally) neighbor that has a 386 that had Win 3x on it. It crashed due to the fact that every one tried to "fix it". I still have my ...
Summary: Hi all, I am building a new computer and want to have it so that I can dual-boot DOS (to Windows for Workgroups 3.11) and Windows XP. I have been rea...
Summary: Go here for how to make sure your data cables are right: I assume you have an IDE CDRom drive, and it isn't more than 5 years old or so. The rules for...
Summary: Can Someone help me w/ my bios? i ran a program called flash-50.exe and it said "File Name To Program". What should I type in? I have another progr...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
