Summary: Hi, it's me again with my stupid old notebook ... - fat16-DOS6.22-win3.11. Scandisk recovers hunderts of bad sectors ... ( actualy about 2 or 3 % of a...
Summary: I have a zenthith data systems 386 and i formated the hdd to put win 3.1.In the midle of the installation it shuts down.when i open it a message was s...
Summary: My DOS6/Win3.1 system has been having several problems lately. One of them is with hard disk D:\. It's 1.6gb and when I first installed and formatte...
Summary: I'm pretty sure 'running from Windows' is only a suggestion - you should be able to continue the install in DOS - that's how I installed mine. Mind yo...
Summary: This is a laptop, right? Possibly a problem with the video driver, might need to restart the installation and try a different video configuration - ei...
Summary: I'm anxious to get my Compaq LTE 486 laptop(no cd rom drive ) up and running with Win 95 again as I'll be using this one as a second computer I'm usin...
Summary: I have a problem with trying to reinstall win:3:11. I get a HDD fail, I press F1, then it tells me to put in boot disk and press enter.I pu...
Summary: Can a CD-Rom work on the same IDE cable as the HDD? I have a 486 with Win3.1 installed, but can't seem to get the CD-Rom working. I'm trying to use ...
Summary: Hi! I've read thru all the archives in 3.11 -- and still can't find a solution to my problem. A couple of folks had similar problems, but there was...
Summary: I have a [pc pentium] 133mhz, I must have formatted it for can induct us [ms dos] 6.22 and [windows] 3.11 Before he/she/it/you had [windows] 98, I ha...
Summary: What should I do when my 386 computer running win 3.1 OS gave me problems.The Error is "HDD controller Error/Failure". Anybody Please Help. Thank you...
Summary: morpheus boot problem (boot not found hdd) regitery not found problem vfat i dont format c: but install windows over windows after its ok (excuse my...
Summary: I'm having problems installing windows 3.1, I have copied the disks to my hdd, and then I run setup, but the instalation program keeps telling me that...
Summary: I have a 486DX/33 with Quantum HD 1227MB (from autodetect) with Dynamic Disk Overlay, DOS6.22/WFWG 3.11. I ran Norton Utilities Ver 7 Calibrate but wh...
Summary: I have been given an old Compaq Contura 3/25 machine (61 MB HDD, 8 MB RAM, 3.5" Floppy, NO CD-Rom) which has "been around a bit" but is in excellent c...
Summary: Looking again at the original post, the problem is not a driver issue. He first must get the system to boot up with the CDROM cabled in and then worry...
Summary: This problem comes on my old computer a 486,windows 95 os, it displays the fdd/hdd control failure then it tells me to press f1 to continue then tell ...
Summary: i get a backup cd from my friend that contain Win 3.1 (Disk1-6) and Win 3.11 (Disk1-8) but too bad my floppy disk (the drive) has some problem so i c...
Summary: Another problem with this stupid Toshiba, but here goes: Whenever you try and boot the computer it says remove the disk from the floppy drive, but th...
Summary: When Windows 3.1 needed to restart every time after some installation completed, Windows was quit to DOS command prompt and an error message ":Missing...
Summary: Hi everyone, I have installed Windows for Workgrous 3.11 some time ago and I found out I'm unable of making it to work with 256 colors (more is imposs...
Summary: Hi I have a Gateway 4dx2-66v sorry I dont know the specs but i do know that it was upgraded to like a over drive cpu and some more ram. I also had u...
Summary: My mate Pamela uses her old computer for word processing. When she turned it on a few days ago it came up with the message "Operating system missing....
Summary: Hi and thanks for the replies. I have tried both suggestions without success. Windows still gets to the splash screen and then back to the prompt. I n...
Summary: Try opening the main program manager group, and running Control Panel. Then select the three crayons (color setup), and see if something like LCD Colo...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
