Summary: NEED HELP, MY HARD DRIVE WON'T BOOT, I'VE TRIED 3 DIFFERENT HARD DRIVES. I'VE PARTITIONED AND FORMATTED 1, THE OTHERS WERE ALREADY BOOTABLE. I GET A...
Summary: Love that name ELMO! Hey Elmo! You CANNOT use the old Win 3.1 DOS commands like trying to transfer the SYSTEM to C drive with Win 95. That just does...
Summary: I have an asus p2-99 mobo and it wont detect my maxtor twenty gig at all! I booted it up for the first time and I Have the hard drive plugged into an ...
Summary: THE PROBLEM IS WITH THE100 MHZ 36 MEGS OF RAM COMPUTER THAT I BUILT I BUILD COMPUTERS BUT THIS IS A PROBLEM I CANT SEEM TO FIX THE PROBLEM IS WITH TH...
Summary: For fast disk to disk copying on a slamm computer, rip out your old hard drive, disconnect the cd rom drive of the new computer, set the old hard driv...
Summary: Here is the response I got from the same query from "calli". My system load would stop at 44% due to an "unable to read .cab file" error message. The ...
Summary: Is there a way to write a boot.ini file so that you have a choice of which hard drive to boot from. If so, which drive does the boot.ini file have to ...
Summary: I have a question. My sister in law has an old Packard Bell her granddaughter gave her. It did have Windows 95 on it, but now when you turn the comput...
Summary: I have a second hard drive installed. I've heard it is possible to boot off more than one hard drive, how do I set it up? Is it possible to set Win98s...
Summary: For some reason and at sporatic intervals, my computer does not recognize my hard drive when I re-boot. Thinking it may have something to do with the...
Summary: I have a new Asus A7V333 board and after hitting the on switch I get "Primary Master None". My hard drive is on Primary Master. I hit the Reset swit...
Summary: My computer has stopped recognizing my hard drive as the boot drive. The cables are connected properly, and the data is still there, the only problem ...
Summary: okay first off i have 630mg primary and a compressed 630mg primary slave. Now my drive wont show in win unless i enter the bios each time i boot it up...
Summary: It could be Monkey B virus. One characteristic is you can't see hard drive when boot from floppy. Run a virus scan. To kill you will probably need ...
Summary: I toasted my old hard drive, and bought a Quantum 1.08 IDE hard drive to install into my spae IBM APtiva 133 Mhz computer. After getting the jumper...
Summary: My computer is a 450MHz machine with Windows 98 installed and an especially active hard drive during boot-up. I replaced the 32MB of SD-RAM with 256MB...
Summary: I am having trouble formating my hard drive.The boot disk will not allow me to get to an A:/ in order to write format c: and when I got to a screen i...
Summary: I find it rather strange that Dell techs didn't suggest you upgrade the BIOS so it would support larger hard drives, CD booting etc. Disk overlays are...
Summary: I'm trying to install a new hard drive in my Compaq Deskpro 4000 I replaced the hard drive with a new Mactor 20GB hard drive. I boot with my boot disc...
Summary: OK, I cracked it. When I originally bought the new MAXTOR hard drive, I used the MAX BLAST software that came with it. My old BIOS couldn't handle t...
Summary: Hey everyone. I just got a copy of windows (it wasnt exacly legal) on a hard drive that my friend gave me. I wanted to keep a fresh install on a diff...
Summary: You can't format and keep anything but you can do the next best thing. Copy the Win9X folder from the Installation CD to the hard drive. Then boot fro...
Summary: you could try this.... Deleting a Hard Drive Partition CAUTION: This will erase any existing partitions on the hard drive. 1. Boot to DOS (version u...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
